#include<reg51.h>
#include"lcd.h"
#include"ds1302.h"
#include"i2c.h"
#include "DS18B20.h"

#include <stdio.h>
#include <string.h>


#define   uchar unsigned char
#define   uint unsigned int	
	
sbit LED0=P2^5;
sbit LED1=P2^6;
sbit LED2=P2^1;

sbit LED3=P2^4;

sbit LED4=P2^3;
sbit LED5=P1^7;

sbit key1 = P1^2;
sbit key2 = P1^3;
sbit key3 = P2^2;
sbit key4 = P2^7;


sbit IN = P3^7;
sbit OUT = P3^6;

sbit SCL1=P1^1;      
sbit SDA1=P1^0;   

int cut = 0;

int led_num = 0;

struct Time{
	int hour;
	int min;
	int sec;
};

struct UserInfo{
	int num;
	int model;
	int set;
	int start;
	float Light;
	int temp;
	struct Time time[2];
};

struct UserInfo userInfo;

void LcdDisplay();
void LcdDisplay1();
void Delay10ms(void);

#define	  SlaveAddress   0x46 //¶¨ÒåÆ÷¼þÔÚIIC×ÜÏßÖеĴӵØÖ·,¸ù¾ÝALT  ADDRESSµØÖ·Òý½Å²»Í¬ÐÞ¸Ä
                              //ALT  ADDRESSÒý½Å½ÓµØʱµØַΪ0x46£¬½ÓµçԴʱµØַΪ0xB8
typedef   unsigned char BYTE;
typedef   unsigned short WORD;

BYTE    BUF[8];                         //½ÓÊÕÊý¾Ý»º´æÇø      	
int     dis_data;                       //±äÁ¿

void delay_nms(unsigned int k);
void InitLcd();
void Init_BH1750(void);

void WriteDataLCM(uchar dataW);
void WriteCommandLCM(uchar CMD,uchar Attribc);
void DisplayOneChar(uchar X,uchar Y,uchar DData);
void conversion(uint temp_data);

void  Single_Write_BH1750(uchar REG_Address);               //µ¥¸öдÈëÊý¾Ý
uchar Single_Read_BH1750(uchar REG_Address);                //µ¥¸ö¶ÁÈ¡ÄÚ²¿¼Ä´æÆ÷Êý¾Ý
void  Multiple_Read_BH1750();                               //Á¬ÐøµÄ¶ÁÈ¡ÄÚ²¿¼Ä´æÆ÷Êý¾Ý
//------------------------------------
void Delay5us();
void Delay5ms();
void BH1750_Start();                    //ÆðʼÐźÅ
void BH1750_Stop();                     //Í£Ö¹ÐźÅ
void BH1750_SendACK(bit ack);           //Ó¦´ðACK
bit  BH1750_RecvACK();                  //¶Áack
void BH1750_SendByte(BYTE dat);         //IICµ¥¸ö×Ö½Úд
BYTE BH1750_RecvByte();                 //IICµ¥¸ö×Ö½Ú¶Á


//ºÁÃëÑÓʱ**************************
void delay_nms(unsigned int k)	
{						
	unsigned int i,j;				
	for(i=0;i<k;i++)
	{			
	for(j=0;j<121;j++)			
	{;}}						
}

void Delay5us()
{
  _nop_();_nop_();_nop_();_nop_();
  _nop_();_nop_();_nop_();_nop_();
	_nop_();_nop_();_nop_();_nop_();
	_nop_();_nop_();_nop_();_nop_();
}

void Delay5ms()
{
    WORD n = 560;

    while (n--);
}

/**************************************
ÆðʼÐźÅ
**************************************/
void BH1750_Start()
{
    SDA1 = 1;                    //À­¸ßÊý¾ÝÏß
    SCL1 = 1;                    //À­¸ßʱÖÓÏß
    Delay5us();                 //ÑÓʱ
    SDA1 = 0;                    //²úÉúϽµÑØ
    Delay5us();                 //ÑÓʱ
    SCL1 = 0;                    //À­µÍʱÖÓÏß
}

/**************************************
Í£Ö¹ÐźÅ
**************************************/
void BH1750_Stop()
{
    SDA1 = 0;                    //À­µÍÊý¾ÝÏß
    SCL1 = 1;                    //À­¸ßʱÖÓÏß
    Delay5us();                 //ÑÓʱ
    SDA1 = 1;                    //²úÉúÉÏÉýÑØ
    Delay5us();                 //ÑÓʱ
}

/**************************************
·¢ËÍÓ¦´ðÐźÅ
Èë¿Ú²ÎÊý:ack (0:ACK 1:NAK)
**************************************/
void BH1750_SendACK(bit ack)
{
    SDA1 = ack;                  //дӦ´ðÐźÅ
    SCL1 = 1;                    //À­¸ßʱÖÓÏß
    Delay5us();                 //ÑÓʱ
    SCL1 = 0;                    //À­µÍʱÖÓÏß
    Delay5us();                 //ÑÓʱ
}

/**************************************
½ÓÊÕÓ¦´ðÐźÅ
**************************************/
bit BH1750_RecvACK()
{
    SCL1 = 1;                    //À­¸ßʱÖÓÏß
    Delay5us();                 //ÑÓʱ
    CY = SDA1;                   //¶ÁÓ¦´ðÐźÅ
    SCL1 = 0;                    //À­µÍʱÖÓÏß
    Delay5us();                 //ÑÓʱ

    return CY;
}

/**************************************
ÏòIIC×ÜÏß·¢ËÍÒ»¸ö×Ö½ÚÊý¾Ý
**************************************/
void BH1750_SendByte(BYTE dat)
{
    BYTE i;

    for (i=0; i<8; i++)         //8λ¼ÆÊýÆ÷
    {
        dat <<= 1;              //ÒƳöÊý¾ÝµÄ×î¸ßλ
        SDA1 = CY;               //ËÍÊý¾Ý¿Ú
        SCL1 = 1;                //À­¸ßʱÖÓÏß
        Delay5us();             //ÑÓʱ
        SCL1 = 0;                //À­µÍʱÖÓÏß
        Delay5us();             //ÑÓʱ
    }
    BH1750_RecvACK();
}

/**************************************
´ÓIIC×ÜÏß½ÓÊÕÒ»¸ö×Ö½ÚÊý¾Ý
**************************************/
BYTE BH1750_RecvByte()
{
    BYTE i;
    BYTE dat = 0;

    SDA1 = 1;                    //ʹÄÜÄÚ²¿ÉÏÀ­,×¼±¸¶ÁÈ¡Êý¾Ý,
    for (i=0; i<8; i++)         //8λ¼ÆÊýÆ÷
    {
        dat <<= 1;
        SCL1 = 1;                //À­¸ßʱÖÓÏß
        Delay5us();             //ÑÓʱ
        dat |= SDA1;             //¶ÁÊý¾Ý               
        SCL1 = 0;                //À­µÍʱÖÓÏß
        Delay5us();             //ÑÓʱ
    }
    return dat;
}

//*********************************

void Single_Write_BH1750(uchar REG_Address)
{
    BH1750_Start();                  //ÆðʼÐźÅ
    BH1750_SendByte(SlaveAddress);   //·¢ËÍÉ豸µØÖ·+дÐźÅ
    BH1750_SendByte(REG_Address);    //ÄÚ²¿¼Ä´æÆ÷µØÖ·£¬
  //  BH1750_SendByte(REG_data);       //ÄÚ²¿¼Ä´æÆ÷Êý¾Ý£¬
    BH1750_Stop();                   //·¢ËÍÍ£Ö¹ÐźÅ
}

//********µ¥×Ö½Ú¶ÁÈ¡*****************************************
/*
uchar Single_Read_BH1750(uchar REG_Address)
{  uchar REG_data;
    BH1750_Start();                          //ÆðʼÐźÅ
    BH1750_SendByte(SlaveAddress);           //·¢ËÍÉ豸µØÖ·+дÐźÅ
    BH1750_SendByte(REG_Address);                   //·¢ËÍ´æ´¢µ¥ÔªµØÖ·£¬´Ó0¿ªÊ¼	
    BH1750_Start();                          //ÆðʼÐźÅ
    BH1750_SendByte(SlaveAddress+1);         //·¢ËÍÉ豸µØÖ·+¶ÁÐźÅ
    REG_data=BH1750_RecvByte();              //¶Á³ö¼Ä´æÆ÷Êý¾Ý
	BH1750_SendACK(1);   
	BH1750_Stop();                           //Í£Ö¹ÐźÅ
    return REG_data; 
}
*/
//*********************************************************
//
//Á¬Ðø¶Á³öBH1750ÄÚ²¿Êý¾Ý
//
//*********************************************************
void Multiple_read_BH1750(void)
	
{   uchar i;	
    BH1750_Start();                          //ÆðʼÐźÅ
    BH1750_SendByte(SlaveAddress+1);         //·¢ËÍÉ豸µØÖ·+¶ÁÐźÅ
	
	 for (i=0; i<3; i++)                      //Á¬Ðø¶ÁÈ¡2¸öµØÖ·Êý¾Ý£¬´æ´¢ÖÐBUF
    {
        BUF[i] = BH1750_RecvByte();          //BUF[0]´æ´¢0x32µØÖ·ÖеÄÊý¾Ý
        if (i == 3)
        {

           BH1750_SendACK(1);                //×îºóÒ»¸öÊý¾ÝÐèÒª»ØNOACK
        }
        else
        {		
          BH1750_SendACK(0);                //»ØÓ¦ACK
       }
   }

    BH1750_Stop();                          //Í£Ö¹ÐźÅ
    Delay5ms();
}


//³õʼ»¯BH1750£¬¸ù¾ÝÐèÒªÇë²Î¿¼pdf½øÐÐÐÞ¸Ä****
void Init_BH1750()
{
   Single_Write_BH1750(0x01);  

}

void Uart_Init()                                
{ 
	TMOD = 0x20 | 0x01;
	SCON = 0x50;                                
	TH1 = 0xFD;                                         
	TL1 = TH1;
	PCON = 0x00;
	EA = 1;                                                
	ES = 1;                                           
	TR1 = 1;                                        
}

void us_delay(uchar t)
{ 
    while(t--);
} 

void Send_Uart(uchar value)
{ 
	ES=0;                                                  
	TI=0;                                            
	SBUF=value;                               
	while(TI==0);                                 
	TI=0;                                             
	ES=1;                                                 
} 

void Bluetooth_Set(uchar *puf)                    
{   
	while(*puf!='\0')                    
	{  
		Send_Uart(*puf);                  
		us_delay(5);  
		puf++;   
	} 
}

void Detection()
{
	static int num = 0;
	int i = 0;
	Single_Write_BH1750(0x01); 
	Single_Write_BH1750(0x10);  
	delay_nms(180);              
	Multiple_Read_BH1750();       
	dis_data=BUF[0];
	dis_data=(dis_data<<8)+BUF[1];
	userInfo.Light = (float)dis_data/1.2;
	
	userInfo.temp = Temper_change();
	userInfo.temp /= 100;
	if(key1==0)		
	{
		Delay10ms();	
		if(key1==0){
			if(userInfo.set == 0){
				if(userInfo.model == 0) userInfo.model = 1;
				else userInfo.model = 0;
				if(userInfo.model == 1) LED4 = 1, LED5 = 0;
				else LED4 = 0, LED5 = 1;
			}
		}
		while((i<50)&&(key1==0)){
			Delay10ms();
			i++;
		}
		i=0;
	}
	
	if(key2==0)		
	{
		Delay10ms();	
		if(key2==0){
			if(userInfo.model){
				led_num++;
				if(led_num >= 5) led_num = 0;
			}else{
				if(userInfo.set == 0) userInfo.set = 1;
				else userInfo.set = 0;
				cut = 0;
			}
			LcdWriteCom(0x01);  //清屏
		}
		while((i<50)&&(key2==0)){
			Delay10ms();
			i++;
		}
		i=0;
	}
	
	if(IN==0)		
	{
		Delay10ms();
		if(IN==0){
			userInfo.num++;
			if(userInfo.num > 99) userInfo.num = 99;
		}
		while((i<50)&&(IN==0)){
			Delay10ms();
			i++;
		}
		i=0;
	}
	
	if(OUT==0)		//��ⰴ��K1�Ƿ���
	{
		Delay10ms();	//��������
		if(OUT==0){
			userInfo.num--;
			if(userInfo.num < 0) userInfo.num = 0;
		}
		while((i<50)&&(OUT==0)){
			Delay10ms();
			i++;
		}
		i=0;
	}
	
	if(key3==0)		//��ⰴ��K1�Ƿ���
	{
		Delay10ms();	//��������
		if(key3==0){
			cut++;
			if(cut >= 4) cut = 0;
		}
		while((i<50)&&(key3==0)){
			Delay10ms();
			i++;
		}
		i=0;
	}
	
	if(key4==0)		//��ⰴ��K1�Ƿ���
	{
		Delay10ms();	//��������
		if(key4==0){
			if(cut == 0){
				userInfo.time[0].hour++;
				if(userInfo.time[0].hour >= 24) userInfo.time[0].hour = 0;
			}else if(cut == 1){
				userInfo.time[0].min++;
				if(userInfo.time[0].min >= 59) userInfo.time[0].min = 0;
			}else if(cut == 2){
					userInfo.time[1].hour++;
					if(userInfo.time[1].hour >= 24) userInfo.time[1].hour = 0;
			}else if(cut == 3){
					userInfo.time[1].min++;
					if(userInfo.time[1].min >= 59) userInfo.time[1].min = 0;
			}
		while((i<50)&&(key4==0)){
			Delay10ms();
			i++;
		}
		i=0;
	}	
	}
}


int getTimeResult()
{
	int result = 1;
	struct Time Nowtime;
	
	Nowtime.hour = TIME[2]/16 * 10 + (TIME[2]&0x0f);
	Nowtime.min = TIME[1]/16 * 10 + (TIME[1]&0x0f);
	
	if(Nowtime.hour < userInfo.time[0].hour || Nowtime.hour > userInfo.time[1].hour) return 0;
	if(Nowtime.hour == userInfo.time[0].hour && Nowtime.min < userInfo.time[0].min) return 0;
	if(Nowtime.hour == userInfo.time[1].hour  && Nowtime.min > userInfo.time[1].min) return 0;
	
	return result;
}


void Dispose()
{

	if(userInfo.model == 0){
		if(getTimeResult() && userInfo.Light < 100){
			if(userInfo.num < 10 && userInfo.num > 0)  LED0 = 0, LED1 = 0, LED2 = 0 ,LED3 = 1;
			else if(userInfo.num >= 10 && userInfo.num < 20)  LED0 = 0, LED1 = 0, LED2 = 1 ,LED3 = 1;
			else if(userInfo.num >= 20 && userInfo.num < 30)  LED0 = 0, LED1 = 1, LED2 = 1 ,LED3 = 1;
			else if(userInfo.num >= 30) LED0 = 1, LED1 = 1, LED2 = 1 ,LED3 = 1;
			else LED0 = 0, LED1 = 0, LED2 = 0 ,LED3 = 0;
		}else{
			LED0 = 0, LED1 = 0, LED2 = 0 ,LED3 = 0;
		}
	}else{
		if(led_num){
			if(led_num == 1) LED0 = 0, LED1 = 0, LED2 = 0 ,LED3 = 1;
			else if(led_num == 2) LED0 = 0, LED1 = 0, LED2 = 1 ,LED3 = 1;
			else if(led_num == 3) LED0 = 0, LED1 = 1, LED2 = 1 ,LED3 = 1;
			else if(led_num == 4) LED0 = 1, LED1 = 1, LED2 = 1 ,LED3 = 1;
		}else{
			LED0 = 0, LED1 = 0, LED2 = 0 ,LED3 = 0;
		}
	}
	LED4 = userInfo.model;
}

void main()
{
	int i = 0;
	uchar str[10];
	Ds1302Init();
	Uart_Init();
	LcdInit();
	
	userInfo.time[0].hour = 18;
	userInfo.time[0].min = 0;
	userInfo.time[0].sec = 0;
	
	userInfo.time[1].hour = 23;
	userInfo.time[1].min = 30;
	userInfo.time[1].sec = 0;

	while(1)
	{
		Ds1302ReadTime();	
		LcdDisplay();
		Detection();
		Dispose();
		sprintf(str, "%d\r\n", userInfo.temp);
		Bluetooth_Set(str);
	}
}

void LcdDisplay()
{
	uint temp_data;
	if(userInfo.set == 0){
		// TODO 显示时间
		LcdWriteCom(0x80);
		LcdWriteData('0'+TIME[4]/16);				//月
		LcdWriteData('0'+(TIME[4]&0x0f));
		LcdWriteData('-');	
		LcdWriteData('0'+TIME[3]/16);				//日
		LcdWriteData('0'+(TIME[3]&0x0f));
		LcdWriteData(' ');
		
		LcdWriteData('0'+TIME[2]/16);				//时
		LcdWriteData('0'+(TIME[2]&0x0f));				 
		LcdWriteData(':');
		LcdWriteData('0'+TIME[1]/16);				//分
		LcdWriteData('0'+(TIME[1]&0x0f));	
		LcdWriteData(':');
		LcdWriteData('0'+TIME[0]/16);				//秒
		LcdWriteData('0'+(TIME[0]&0x0f));
		
		LcdWriteData(' ');	
		LcdWriteData('0'+(TIME[5]&0x0f));
		
		LcdWriteCom(0x80 + 0x40);
		temp_data = userInfo.Light;
		temp_data=temp_data%10000;
		LcdWriteData(temp_data/1000+0x30);
		temp_data=temp_data%1000;
		LcdWriteData(temp_data/100+0x30);
		temp_data=temp_data%100;
		LcdWriteData(temp_data/10+0x30);
		temp_data=temp_data%10;
		LcdWriteData(temp_data+0x30);
		LcdWriteData('L');
		LcdWriteData('x');
		LcdWriteData(' ');
		LcdWriteData(userInfo.temp / 10 + 0x30);
		LcdWriteData(userInfo.temp % 10 + 0x30);
		LcdWriteData('C');
		
		LcdWriteData(' ');
		LcdWriteData(userInfo.num / 10 % 10 + 0x30);
		LcdWriteData(userInfo.num % 10 + 0x30);
	}else{
		LcdWriteCom(0x80);
		LcdWriteData('0'+ userInfo.time[0].hour/10);				//时
		LcdWriteData('0'+ userInfo.time[0].hour% 10);				 
		LcdWriteData(':');
		LcdWriteData('0'+userInfo.time[0].min/10);				//分
		LcdWriteData('0'+ userInfo.time[0].min % 10);	
		LcdWriteData(':');
		LcdWriteData('0'+userInfo.time[0].sec / 10);				//秒
		LcdWriteData('0'+userInfo.time[0].sec % 10);
		LcdWriteData(' ');
		
		LcdWriteData('0'+cut);
		
		LcdWriteCom(0x80 + 0x40);
		LcdWriteData('0'+ userInfo.time[1].hour/10);				//时
		LcdWriteData('0'+ userInfo.time[1].hour% 10);				 
		LcdWriteData(':');
		LcdWriteData('0'+userInfo.time[1].min/10);				//分
		LcdWriteData('0'+ userInfo.time[1].min % 10);	
		LcdWriteData(':');
		LcdWriteData('0'+userInfo.time[1].sec / 10);				//秒
		LcdWriteData('0'+userInfo.time[1].sec % 10);
	}
}


void Delay10ms(void)   //��� 0us
{
    unsigned char a,b,c;
    for(c=1;c>0;c--)
        for(b=38;b>0;b--)
            for(a=130;a>0;a--);
}