/*
 * @Author: your name
 * @Date: 2022-04-15 23:28:17
 * @LastEditTime: 2022-04-17 21:20:15
 * @LastEditors: Please set LastEditors
 * @Description: 打开koroFileHeader查看配置 进行设置: https://github.com/OBKoro1/koro1FileHeader/wiki/%E9%85%8D%E7%BD%AE
 * @FilePath: \USERe:\项目\兼职项目\smart_waterheater\stm32\HARDWARE\OLED\oled.h
 */
//  ��������   : 0.69��OLED �ӿ���ʾ����(STM32F103ZEϵ��IIC)
//              ˵��: 
//              ----------------------------------------------------------------
//              GND   ��Դ��
//              VCC   ��5V��3.3v��Դ
//              SCL   ��PC14��SCL��
//              SDA   ��PC15��SDA��            
//              ----------------------------------------------------------------
//Copyright(C) �о�԰����2014/3/16
//All rights reserved
//////////////////////////////////////////////////////////////////////////////////
#ifndef __OLED_H
#define __OLED_H			  	 
#include "sys.h"
#include "stdlib.h"	    	
#define OLED_MODE 0
#define SIZE 8
#define XLevelL		0x00
#define XLevelH		0x10
#define Max_Column	128
#define Max_Row		64
#define	Brightness	0xFF 
#define X_WIDTH 	128
#define Y_WIDTH 	64	    						  
//-----------------OLED IIC�˿ڶ���----------------  					   

#define OLED_SCLK_Clr() GPIO_ResetBits(GPIOB,GPIO_Pin_13)//SCL
#define OLED_SCLK_Set() GPIO_SetBits(GPIOB ,GPIO_Pin_13)

#define OLED_SDIN_Clr() GPIO_ResetBits(GPIOB,GPIO_Pin_15)//SDA
#define OLED_SDIN_Set() GPIO_SetBits(GPIOB,GPIO_Pin_15)

 		     
#define OLED_CMD  0	//���
#define OLED_DATA 1	//���


//OLED�����ú���
void OLED_WR_Byte(unsigned dat,unsigned cmd);  
void OLED_Display_On(void);
void OLED_Display_Off(void);	   							   		    
void OLED_Init(void);
void OLED_Clear(void);
void OLED_DrawPoint(u8 x,u8 y,u8 t);
void OLED_Fill(u8 x1,u8 y1,u8 x2,u8 y2,u8 dot);
void OLED_ShowChar(u8 x,u8 y,u8 chr,u8 Char_Size);
void OLED_ShowNum(u8 x,u8 y,u32 num,u8 len,u8 size);
void OLED_ShowString(u8 x,u8 y, u8 *p,u8 Char_Size);	 
void OLED_Set_Pos(unsigned char x, unsigned char y);
void OLED_ShowCHinese(u8 x,u8 y,u8 no);
void OLED_DrawBMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[]);
void Delay_50ms(unsigned int Del_50ms);
void Delay_1ms(unsigned int Del_1ms);
void fill_picture(unsigned char fill_Data);
void Picture(void);
void IIC_Start(void);
void IIC_Stop(void);
void Write_IIC_Command(unsigned char IIC_Command);
void Write_IIC_Data(unsigned char IIC_Data);
void Write_IIC_Byte(unsigned char IIC_Byte);

void IIC_Wait_Ack(void);

#endif