You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
531 lines
21 KiB
531 lines
21 KiB
/** |
|
****************************************************************************** |
|
* @file stm32f10x_sdio.h |
|
* @author MCD Application Team |
|
* @version V3.5.0 |
|
* @date 11-March-2011 |
|
* @brief This file contains all the functions prototypes for the SDIO firmware |
|
* library. |
|
****************************************************************************** |
|
* @attention |
|
* |
|
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS |
|
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE |
|
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY |
|
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING |
|
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE |
|
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. |
|
* |
|
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2> |
|
****************************************************************************** |
|
*/ |
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/ |
|
#ifndef __STM32F10x_SDIO_H |
|
#define __STM32F10x_SDIO_H |
|
|
|
#ifdef __cplusplus |
|
extern "C" { |
|
#endif |
|
|
|
/* Includes ------------------------------------------------------------------*/ |
|
#include "stm32f10x.h" |
|
|
|
/** @addtogroup STM32F10x_StdPeriph_Driver |
|
* @{ |
|
*/ |
|
|
|
/** @addtogroup SDIO |
|
* @{ |
|
*/ |
|
|
|
/** @defgroup SDIO_Exported_Types |
|
* @{ |
|
*/ |
|
|
|
typedef struct |
|
{ |
|
uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. |
|
This parameter can be a value of @ref SDIO_Clock_Edge */ |
|
|
|
uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is |
|
enabled or disabled. |
|
This parameter can be a value of @ref SDIO_Clock_Bypass */ |
|
|
|
uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or |
|
disabled when the bus is idle. |
|
This parameter can be a value of @ref SDIO_Clock_Power_Save */ |
|
|
|
uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width. |
|
This parameter can be a value of @ref SDIO_Bus_Wide */ |
|
|
|
uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled. |
|
This parameter can be a value of @ref SDIO_Hardware_Flow_Control */ |
|
|
|
uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller. |
|
This parameter can be a value between 0x00 and 0xFF. */ |
|
|
|
} SDIO_InitTypeDef; |
|
|
|
typedef struct |
|
{ |
|
uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent |
|
to a card as part of a command message. If a command |
|
contains an argument, it must be loaded into this register |
|
before writing the command to the command register */ |
|
|
|
uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */ |
|
|
|
uint32_t SDIO_Response; /*!< Specifies the SDIO response type. |
|
This parameter can be a value of @ref SDIO_Response_Type */ |
|
|
|
uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled. |
|
This parameter can be a value of @ref SDIO_Wait_Interrupt_State */ |
|
|
|
uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM) |
|
is enabled or disabled. |
|
This parameter can be a value of @ref SDIO_CPSM_State */ |
|
} SDIO_CmdInitTypeDef; |
|
|
|
typedef struct |
|
{ |
|
uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ |
|
|
|
uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */ |
|
|
|
uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer. |
|
This parameter can be a value of @ref SDIO_Data_Block_Size */ |
|
|
|
uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer |
|
is a read or write. |
|
This parameter can be a value of @ref SDIO_Transfer_Direction */ |
|
|
|
uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode. |
|
This parameter can be a value of @ref SDIO_Transfer_Type */ |
|
|
|
uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM) |
|
is enabled or disabled. |
|
This parameter can be a value of @ref SDIO_DPSM_State */ |
|
} SDIO_DataInitTypeDef; |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Exported_Constants |
|
* @{ |
|
*/ |
|
|
|
/** @defgroup SDIO_Clock_Edge |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000) |
|
#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000) |
|
#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \ |
|
((EDGE) == SDIO_ClockEdge_Falling)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Clock_Bypass |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000) |
|
#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400) |
|
#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \ |
|
((BYPASS) == SDIO_ClockBypass_Enable)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Clock_Power_Save |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000) |
|
#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200) |
|
#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \ |
|
((SAVE) == SDIO_ClockPowerSave_Enable)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Bus_Wide |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_BusWide_1b ((uint32_t)0x00000000) |
|
#define SDIO_BusWide_4b ((uint32_t)0x00000800) |
|
#define SDIO_BusWide_8b ((uint32_t)0x00001000) |
|
#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \ |
|
((WIDE) == SDIO_BusWide_8b)) |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Hardware_Flow_Control |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000) |
|
#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000) |
|
#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \ |
|
((CONTROL) == SDIO_HardwareFlowControl_Enable)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Power_State |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_PowerState_OFF ((uint32_t)0x00000000) |
|
#define SDIO_PowerState_ON ((uint32_t)0x00000003) |
|
#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
|
|
/** @defgroup SDIO_Interrupt_sources |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001) |
|
#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002) |
|
#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004) |
|
#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008) |
|
#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010) |
|
#define SDIO_IT_RXOVERR ((uint32_t)0x00000020) |
|
#define SDIO_IT_CMDREND ((uint32_t)0x00000040) |
|
#define SDIO_IT_CMDSENT ((uint32_t)0x00000080) |
|
#define SDIO_IT_DATAEND ((uint32_t)0x00000100) |
|
#define SDIO_IT_STBITERR ((uint32_t)0x00000200) |
|
#define SDIO_IT_DBCKEND ((uint32_t)0x00000400) |
|
#define SDIO_IT_CMDACT ((uint32_t)0x00000800) |
|
#define SDIO_IT_TXACT ((uint32_t)0x00001000) |
|
#define SDIO_IT_RXACT ((uint32_t)0x00002000) |
|
#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000) |
|
#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000) |
|
#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000) |
|
#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000) |
|
#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000) |
|
#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000) |
|
#define SDIO_IT_TXDAVL ((uint32_t)0x00100000) |
|
#define SDIO_IT_RXDAVL ((uint32_t)0x00200000) |
|
#define SDIO_IT_SDIOIT ((uint32_t)0x00400000) |
|
#define SDIO_IT_CEATAEND ((uint32_t)0x00800000) |
|
#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Command_Index |
|
* @{ |
|
*/ |
|
|
|
#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Response_Type |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_Response_No ((uint32_t)0x00000000) |
|
#define SDIO_Response_Short ((uint32_t)0x00000040) |
|
#define SDIO_Response_Long ((uint32_t)0x000000C0) |
|
#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \ |
|
((RESPONSE) == SDIO_Response_Short) || \ |
|
((RESPONSE) == SDIO_Response_Long)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Wait_Interrupt_State |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */ |
|
#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */ |
|
#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */ |
|
#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \ |
|
((WAIT) == SDIO_Wait_Pend)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_CPSM_State |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_CPSM_Disable ((uint32_t)0x00000000) |
|
#define SDIO_CPSM_Enable ((uint32_t)0x00000400) |
|
#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Response_Registers |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_RESP1 ((uint32_t)0x00000000) |
|
#define SDIO_RESP2 ((uint32_t)0x00000004) |
|
#define SDIO_RESP3 ((uint32_t)0x00000008) |
|
#define SDIO_RESP4 ((uint32_t)0x0000000C) |
|
#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \ |
|
((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Data_Length |
|
* @{ |
|
*/ |
|
|
|
#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Data_Block_Size |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000) |
|
#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010) |
|
#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020) |
|
#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030) |
|
#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040) |
|
#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050) |
|
#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060) |
|
#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070) |
|
#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080) |
|
#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090) |
|
#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0) |
|
#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0) |
|
#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0) |
|
#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0) |
|
#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0) |
|
#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \ |
|
((SIZE) == SDIO_DataBlockSize_2b) || \ |
|
((SIZE) == SDIO_DataBlockSize_4b) || \ |
|
((SIZE) == SDIO_DataBlockSize_8b) || \ |
|
((SIZE) == SDIO_DataBlockSize_16b) || \ |
|
((SIZE) == SDIO_DataBlockSize_32b) || \ |
|
((SIZE) == SDIO_DataBlockSize_64b) || \ |
|
((SIZE) == SDIO_DataBlockSize_128b) || \ |
|
((SIZE) == SDIO_DataBlockSize_256b) || \ |
|
((SIZE) == SDIO_DataBlockSize_512b) || \ |
|
((SIZE) == SDIO_DataBlockSize_1024b) || \ |
|
((SIZE) == SDIO_DataBlockSize_2048b) || \ |
|
((SIZE) == SDIO_DataBlockSize_4096b) || \ |
|
((SIZE) == SDIO_DataBlockSize_8192b) || \ |
|
((SIZE) == SDIO_DataBlockSize_16384b)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Transfer_Direction |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000) |
|
#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002) |
|
#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \ |
|
((DIR) == SDIO_TransferDir_ToSDIO)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Transfer_Type |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_TransferMode_Block ((uint32_t)0x00000000) |
|
#define SDIO_TransferMode_Stream ((uint32_t)0x00000004) |
|
#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \ |
|
((MODE) == SDIO_TransferMode_Block)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_DPSM_State |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_DPSM_Disable ((uint32_t)0x00000000) |
|
#define SDIO_DPSM_Enable ((uint32_t)0x00000001) |
|
#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Flags |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001) |
|
#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002) |
|
#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004) |
|
#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008) |
|
#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010) |
|
#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020) |
|
#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040) |
|
#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080) |
|
#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100) |
|
#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200) |
|
#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400) |
|
#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800) |
|
#define SDIO_FLAG_TXACT ((uint32_t)0x00001000) |
|
#define SDIO_FLAG_RXACT ((uint32_t)0x00002000) |
|
#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000) |
|
#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000) |
|
#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000) |
|
#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000) |
|
#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000) |
|
#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000) |
|
#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000) |
|
#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000) |
|
#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000) |
|
#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000) |
|
#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \ |
|
((FLAG) == SDIO_FLAG_DCRCFAIL) || \ |
|
((FLAG) == SDIO_FLAG_CTIMEOUT) || \ |
|
((FLAG) == SDIO_FLAG_DTIMEOUT) || \ |
|
((FLAG) == SDIO_FLAG_TXUNDERR) || \ |
|
((FLAG) == SDIO_FLAG_RXOVERR) || \ |
|
((FLAG) == SDIO_FLAG_CMDREND) || \ |
|
((FLAG) == SDIO_FLAG_CMDSENT) || \ |
|
((FLAG) == SDIO_FLAG_DATAEND) || \ |
|
((FLAG) == SDIO_FLAG_STBITERR) || \ |
|
((FLAG) == SDIO_FLAG_DBCKEND) || \ |
|
((FLAG) == SDIO_FLAG_CMDACT) || \ |
|
((FLAG) == SDIO_FLAG_TXACT) || \ |
|
((FLAG) == SDIO_FLAG_RXACT) || \ |
|
((FLAG) == SDIO_FLAG_TXFIFOHE) || \ |
|
((FLAG) == SDIO_FLAG_RXFIFOHF) || \ |
|
((FLAG) == SDIO_FLAG_TXFIFOF) || \ |
|
((FLAG) == SDIO_FLAG_RXFIFOF) || \ |
|
((FLAG) == SDIO_FLAG_TXFIFOE) || \ |
|
((FLAG) == SDIO_FLAG_RXFIFOE) || \ |
|
((FLAG) == SDIO_FLAG_TXDAVL) || \ |
|
((FLAG) == SDIO_FLAG_RXDAVL) || \ |
|
((FLAG) == SDIO_FLAG_SDIOIT) || \ |
|
((FLAG) == SDIO_FLAG_CEATAEND)) |
|
|
|
#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00)) |
|
|
|
#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \ |
|
((IT) == SDIO_IT_DCRCFAIL) || \ |
|
((IT) == SDIO_IT_CTIMEOUT) || \ |
|
((IT) == SDIO_IT_DTIMEOUT) || \ |
|
((IT) == SDIO_IT_TXUNDERR) || \ |
|
((IT) == SDIO_IT_RXOVERR) || \ |
|
((IT) == SDIO_IT_CMDREND) || \ |
|
((IT) == SDIO_IT_CMDSENT) || \ |
|
((IT) == SDIO_IT_DATAEND) || \ |
|
((IT) == SDIO_IT_STBITERR) || \ |
|
((IT) == SDIO_IT_DBCKEND) || \ |
|
((IT) == SDIO_IT_CMDACT) || \ |
|
((IT) == SDIO_IT_TXACT) || \ |
|
((IT) == SDIO_IT_RXACT) || \ |
|
((IT) == SDIO_IT_TXFIFOHE) || \ |
|
((IT) == SDIO_IT_RXFIFOHF) || \ |
|
((IT) == SDIO_IT_TXFIFOF) || \ |
|
((IT) == SDIO_IT_RXFIFOF) || \ |
|
((IT) == SDIO_IT_TXFIFOE) || \ |
|
((IT) == SDIO_IT_RXFIFOE) || \ |
|
((IT) == SDIO_IT_TXDAVL) || \ |
|
((IT) == SDIO_IT_RXDAVL) || \ |
|
((IT) == SDIO_IT_SDIOIT) || \ |
|
((IT) == SDIO_IT_CEATAEND)) |
|
|
|
#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00)) |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Read_Wait_Mode |
|
* @{ |
|
*/ |
|
|
|
#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001) |
|
#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000) |
|
#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \ |
|
((MODE) == SDIO_ReadWaitMode_DATA2)) |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Exported_Macros |
|
* @{ |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** @defgroup SDIO_Exported_Functions |
|
* @{ |
|
*/ |
|
|
|
void SDIO_DeInit(void); |
|
void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct); |
|
void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct); |
|
void SDIO_ClockCmd(FunctionalState NewState); |
|
void SDIO_SetPowerState(uint32_t SDIO_PowerState); |
|
uint32_t SDIO_GetPowerState(void); |
|
void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState); |
|
void SDIO_DMACmd(FunctionalState NewState); |
|
void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); |
|
void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct); |
|
uint8_t SDIO_GetCommandResponse(void); |
|
uint32_t SDIO_GetResponse(uint32_t SDIO_RESP); |
|
void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct); |
|
void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct); |
|
uint32_t SDIO_GetDataCounter(void); |
|
uint32_t SDIO_ReadData(void); |
|
void SDIO_WriteData(uint32_t Data); |
|
uint32_t SDIO_GetFIFOCount(void); |
|
void SDIO_StartSDIOReadWait(FunctionalState NewState); |
|
void SDIO_StopSDIOReadWait(FunctionalState NewState); |
|
void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode); |
|
void SDIO_SetSDIOOperation(FunctionalState NewState); |
|
void SDIO_SendSDIOSuspendCmd(FunctionalState NewState); |
|
void SDIO_CommandCompletionCmd(FunctionalState NewState); |
|
void SDIO_CEATAITCmd(FunctionalState NewState); |
|
void SDIO_SendCEATACmd(FunctionalState NewState); |
|
FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG); |
|
void SDIO_ClearFlag(uint32_t SDIO_FLAG); |
|
ITStatus SDIO_GetITStatus(uint32_t SDIO_IT); |
|
void SDIO_ClearITPendingBit(uint32_t SDIO_IT); |
|
|
|
#ifdef __cplusplus |
|
} |
|
#endif |
|
|
|
#endif /* __STM32F10x_SDIO_H */ |
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/** |
|
* @} |
|
*/ |
|
|
|
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
|
|
|