完成大部分功能

3 years ago · 703eb18952
23 changed files with 1815 additions and 1740 deletions
--- a/IRIN.LST
+++ b/IRIN.LST
@ -1,4 +1,4 @@
-C51 COMPILER V9.56.0.0   IRIN                                                              04/06/2022 23:56:38 PAGE 1   
+C51 COMPILER V9.56.0.0   IRIN                                                              04/08/2022 03:09:39 PAGE 1   
 C51 COMPILER V9.56.0.0, COMPILATION OF MODULE IRIN
@ -10,223 +10,120 @@ line level    source
   1          #include "IRIN.h"
   2          #include "i2c.h"
   3          
-   4          uint journey;
+   4          uint mileage = 0;
-   5          uint journey1;
+   5          
-   6          extern uchar pwm_left;
+   6          uint count=0;   
-   7          unsigned int b;
+   7          
-   8          unsigned int c;
+   8          uchar ms=0;
-   9          extern uint time1;
+   9          uint speed=0;
-  10          extern uchar pwm_val_left;
+  10          uint r_s=0;
-  11          unsigned int b2;
+  11          
-  12          unsigned int c2;
+  12          extern uint model;
-  13          
+  13          extern uchar set;
-  14          uint money=7;
+  14          
-  15          uint sudu=0;
+  15          void delay11(int i)
-  16          
+  16          {
-  17          uint count=0;   //栅格是一圈20个
+  17   1        while(i--); 
-  18          
+  18   1      }
-  19          uchar ms=0;
+  19          
-  20          uint speed=0;
+  20          void IRIN_Init(void)
-  21          uint r_s=0;
+  21          {
-  22          
+  22   1         TMOD=0x01 | 0x20;
-  23          bit state=0;
+  23   1         TH0=0XFc;
-  24          bit s0=0;
+  24   1         TL0=0X18;
-  25          bit flas=0;
+  25   1         ET0=1;
-  26          
+  26   1         TR0=1;
-  27          uchar sec=0;
+  27   1         EA=1;
-  28          uchar sec1=0;
+  28   1         EX1=1;
-  29          
+  29   1         IT1=1;
-  30          /*******************************************************************************
+  30   1      }
-  31          * 函 数 名         : delay
+  31          
-  32          * 函数功能       : 延时函数，i=1时，大约延时10us
+  32          void display()
-  33          *******************************************************************************/
+  33          {
-  34          void delay11(int i)
+  34   1        LcdSetCursor(0,0);
-  35          {
+  35   1        LcdShowStr(0,0,"");
-  36   1        while(i--); 
+  36   1        Lcd1602_Write_Data(0x30+speed/100%10);
-  37   1      }
+  37   1        Lcd1602_Write_Data(0x30+speed/10%10);
-  38          
+  38   1        Lcd1602_Write_Data(0x30+speed%10);
-  39          void IRIN_Init(void)
+  39   1        LcdShowStr(3,0,"KM/h ");
-  40          {
+  40   1        
-  41   1         TMOD=0x01 | 0x20 ;//定时器1工作方式1
+  41   1        LcdShowStr(8,0,"");
-  42   1         TH0=0x3C;
+  42   1        Lcd1602_Write_Data(0x30+mileage/100%10);
-  43   1         TL0=0xb0;
+  43   1        Lcd1602_Write_Data(0x30+mileage/10%10);
-  44   1         ET0=1;
+  44   1        Lcd1602_Write_Data(0x30+mileage%10);
-  45   1         TR0=1;
+  45   1        LcdShowStr(11,0,"m         ");
-  46   1         EA=1;
+  46   1        
-  47   1         EX1=1;
+  47   1        if(model == 0) LcdShowStr(13,0," ");
-  48   1         IT1=1;
+  48   1        else if(model == 1) LcdShowStr(13, 0, "L");
-  49   1      }
+  49   1        else if(model == 2) LcdShowStr(13, 0, "M");
-  50          
+  50   1        else LcdShowStr(13, 0, "H");
-  51          void display()
+  51   1      }
-  52           {
+  52          
-  53   1        if(state==0) 
+  53          
-  54   1         {
+  54          void Key_scan(){
-  55   2           sudu=At24c02Read(10);
+  55   1        if(k1==0)
-C51 COMPILER V9.56.0.0   IRIN                                                              04/06/2022 23:56:38 PAGE 2   
+C51 COMPILER V9.56.0.0   IRIN                                                              04/08/2022 03:09:39 PAGE 2   
-  56   2           if(money>7)
+  56   1        {
-  57   2           {
+  57   2          delay11(1000);  //Ïû¶¶´¦Àí
-  58   3             money=At24c02Read(5);
+  58   2          if(k1==0){
-  59   3           }
+  59   3            model++;
-  60   2           LcdSetCursor(0,0);
+  60   3            if(model >= 4) model = 0;
-  61   2           LcdShowStr(0,0,"Speed:");
+  61   3          }
-  62   2           Lcd1602_Write_Data(0x30+sudu/100%10);
+  62   2          while(!k1);
-  63   2           Lcd1602_Write_Data(0x30+sudu/10%10);
+  63   2        }
-  64   2           Lcd1602_Write_Data(0x30+sudu%10);
+  64   1        
-  65   2           LcdShowStr(10,0,"KM/h");
+  65   1        if(k2==0)
-  66   2           
+  66   1        {
-  67   2           LcdShowStr(0,1,"L:");
+  67   2          delay11(1000);  //Ïû¶¶´¦Àí
-  68   2           Lcd1602_Write_Data(journey/10000%10+0x30);
+  68   2          if(k2==0){
-  69   2           Lcd1602_Write_Data(journey/1000%10+0x30);
+  69   3            set = 1;
-  70   2           Lcd1602_Write_Data(journey/100%10+0x30);
+  70   3          }
-  71   2           Lcd1602_Write_Data(journey/10%10+0x30);
+  71   2          while(!k2);
-  72   2           Lcd1602_Write_Data(journey%10+0x30);
+  72   2        }
-  73   2           LcdShowStr(7,1,"M");
+  73   1      
-  74   2           
+  74   1      }
-  75   2           if(journey>1000)
+  75          
-  76   2            {
+  76          void time0() interrupt 1  
-  77   3              money=(journey-1000)*0.002+7;
+  77          {
-  78   3              At24c02Write(5,money);
+  78   1        static int time = 0;
-  79   3            }
+  79   1        TH0=0XFc;
-  80   2            money=money*10;
+  80   1        TL0=0X18;
-  81   2            LcdShowStr(9,1,"Q:");
+  81   1        time++; 
-  82   2            Lcd1602_Write_Data(money/1000%10+0x30);
+  82   1        pwm_out_right_moto();
-  83   2            Lcd1602_Write_Data(money/100%10+0x30);
+  83   1        if(time >= 500){
-  84   2            Lcd1602_Write_Data(money/10%10+0x30);
+  84   2          EX1=0;
-  85   2            LcdShowStr(14,1,".");
+  85   2          time = 0;    
-  86   2            Lcd1602_Write_Data(money%10+0x30);
+  86   2          r_s=count;                  
-  87   2            
+  87   2          count=0;
-  88   2             money=money/10;
+  88   2          EX1=1;        
-  89   2            
+  89   2          speed=speed*0.5+(r_s*6)*0.5;         
-  90   2          }
+  90   2          speed=(0.15*speed);
-  91   1       }
+  91   2          mileage = mileage+(r_s*2.5/20);
-  92           
+  92   2        }
-  93           
+  93   1      }
-  94           
+  94          
-  95           void keypros()
+  95          void int1() interrupt 2 
-  96           {
+  96          {
-  97   1          if(k2==0)
+  97   1        count++;      
-  98   1        {
+  98   1      }
-  99   2          delay11(1000);  //消抖处理
+  99          
- 100   2          if(k2==0)
+ 100          
- 101   2          {
+ 101          
- 102   3            sudu=At24c02Read(10);   //读取EEPROM地址1内的数据   
+ 102          
- 103   3            
+ 103          
- 104   3            b2=At24c02Read(1);
+ 104          
- 105   3            c2=At24c02Read(8);
+ 105           
 106   3            journey=(b2<<8) | c2;
 107   3          
 108   3            money=At24c02Read(5);
 109   3            
 110   3          }
 111   2          while(!k2);
 112   2        }
 113   1        
 114   1        if(k1==0)
 115   1        {
 116   2          delay11(1000);  //消抖处理
 117   2          if(k1==0)
 C51 COMPILER V9.56.0.0   IRIN                                                              04/06/2022 23:56:38 PAGE 3   
 118   2          {
 119   3            flas=1;
 120   3      
 121   3          }
 122   2          while(!k1);
 123   2        }
 124   1        if(k4==0)
 125   1        {
 126   2          delay11(1000);  //消抖处理
 127   2          if(k4==0)
 128   2          {
 129   3            if(pwm_left>=20)
 130   3            {
 131   4              pwm_left=1;
 132   4            }
 133   3            else
 134   3            {       
 135   4            pwm_left++;
 136   4            }
 137   3          }
 138   2          while(!k4);
 139   2        }
 140   1        
 141   1       }
 142           
 143           void time0() interrupt 1  //定时器 0 
 144           {
 145   1         TH0=0x3C;
 146   1         TL0=0xb0;         //50ms定时
 147   1         ms++;             //变量50ms加一 
 148   1         if(ms%5==0)   s0=~s0;
 149   1         
 150   1         
 151   1         if(ms%10==0)        //500ms定时
 152   1          {
 153   2            
 154   2              if(sec!=0)  sec--;
 155   2              if(sec1!=0) sec1--;
 156   2              ms=0;          //清零变量
 157   2              EX1=0;         //关闭外部中断，保证变量在计算的时候不会增加
 158   2              r_s=count;       //因为是500ms检测一次转动数据，所以要想一秒转动的圈数是 speed=count*2   ,但是光栅是一圈2
             -0格，所以还要除以20；
 159   2                               //综合一下，一秒转动的圈数就是  speed=count*2/20    ==》   speed=counr/10;
 160   2                count=0;             //清零变量
 161   2              EX1=1;         //打开外部中断
 162   2              speed=speed*0.5+(r_s*6)*0.5;          //  这里r_s是一秒走的圈数，然后乘以60得到60秒走的圈数，单位变成了
             -   r/min；   总方式  speed=count/10*60;  ==>> speed=count*6;
 163   2              
 164   2              if(flas==0)
 165   2              {
 166   3                sudu=(0.15*speed);
 167   3                At24c02Write(10,sudu);
 168   3                
 169   3                journey=journey+(r_s*2.5/20);
 170   3                journey1=journey;
 171   3                c = journey & 0x00FF;
 172   3                At24c02Write(8,c);
 173   3                  
 174   3                delay11(1000); 
 175   3                b=journey1>>8;
 176   3                At24c02Write(1,b);
 177   3              }
 C51 COMPILER V9.56.0.0   IRIN                                                              04/06/2022 23:56:38 PAGE 4   
 178   2              else
 179   2              {
 180   3                journey=0;
 181   3                money=7;        
 182   3                At24c02Write(1,journey);
 183   3                At24c02Write(8,journey);
 184   3                At24c02Write(5,money);
 185   3                flas=0;
 186   3              }
 187   2        }
 188   1      }
 189           
 190          void int1()  interrupt 2  //外部中断 1
 191           {
 192   1         
 193   1         count++;         //中断每触发一次，变量加一  
 194   1         
 195   1       }
 196          
 197          
 198          
 199          
 200          
 201          
 202           
 MODULE INFORMATION:   STATIC OVERLAYABLE
-   CODE SIZE        =   1006    ----
+   CODE SIZE        =    623    ----
-   CONSTANT SIZE    =     22    ----
+   CONSTANT SIZE    =     26    ----
   XDATA SIZE       =   ----    ----
   PDATA SIZE       =   ----    ----
-   DATA SIZE        =     25    ----
+   DATA SIZE        =     11    ----
   IDATA SIZE       =   ----    ----
-   BIT SIZE         =      3    ----
+   BIT SIZE         =   ----    ----
 END OF MODULE INFORMATION.
--- a/IRIN.OBJ
+++ b/IRIN.OBJ
--- a/IRIN.c
+++ b/IRIN.c
@ -1,36 +1,17 @@
 #include "IRIN.h"
 #include "i2c.h"
-uint journey;
+uint mileage = 0;
 uint journey1;
 extern uchar pwm_left;
 unsigned int b;
 unsigned int c;
 extern uint time1;
 extern uchar pwm_val_left;
 unsigned int b2;
 unsigned int c2;
-uint money=7;
+uint count=0;	  
 uint sudu=0;
 uint count=0;	  //栅格是一圈20个
 uchar ms=0;
 uint speed=0;
 uint r_s=0;
-bit state=0;
+extern uint model;
-bit s0=0;
+extern uchar set;
 bit flas=0;
 uchar sec=0;
 uchar sec1=0;
 /*******************************************************************************
 * 函 数 名         : delay
 * 函数功能		   : 延时函数，i=1时，大约延时10us
 *******************************************************************************/
 void delay11(int i)
 {
 	while(i--);	
@ -38,9 +19,9 @@ void delay11(int i)
 void IRIN_Init(void)
 {
-	 TMOD=0x01 | 0x20 ;//定时器1工作方式1
+   TMOD=0x01 | 0x20;
-   TH0=0x3C;
+   TH0=0XFc;
-   TL0=0xb0;
+   TL0=0X18;
   ET0=1;
   TR0=1;
   EA=1;
@ -49,150 +30,72 @@ void IRIN_Init(void)
 }
 void display()
- {
+{
-  if(state==0) 
+	LcdSetCursor(0,0);
-   {
+	LcdShowStr(0,0,"");
-		 sudu=At24c02Read(10);
+	Lcd1602_Write_Data(0x30+speed/100%10);
-		 if(money>7)
+	Lcd1602_Write_Data(0x30+speed/10%10);
-		 {
+	Lcd1602_Write_Data(0x30+speed%10);
-		   money=At24c02Read(5);
+	LcdShowStr(3,0,"KM/h ");
-		 }
+	
-	   LcdSetCursor(0,0);
+	LcdShowStr(8,0,"");
-	   LcdShowStr(0,0,"Speed:");
+	Lcd1602_Write_Data(0x30+mileage/100%10);
-	   Lcd1602_Write_Data(0x30+sudu/100%10);
+	Lcd1602_Write_Data(0x30+mileage/10%10);
-	   Lcd1602_Write_Data(0x30+sudu/10%10);
+	Lcd1602_Write_Data(0x30+mileage%10);
-	   Lcd1602_Write_Data(0x30+sudu%10);
+	LcdShowStr(11,0,"m         ");
 	   LcdShowStr(10,0,"KM/h");
 		 LcdShowStr(0,1,"L:");
 		 Lcd1602_Write_Data(journey/10000%10+0x30);
 		 Lcd1602_Write_Data(journey/1000%10+0x30);
 		 Lcd1602_Write_Data(journey/100%10+0x30);
 		 Lcd1602_Write_Data(journey/10%10+0x30);
 		 Lcd1602_Write_Data(journey%10+0x30);
 		 LcdShowStr(7,1,"M");
     if(journey>1000)
 	    {
 		  	money=(journey-1000)*0.002+7;
 				At24c02Write(5,money);
      }
 			money=money*10;
 		  LcdShowStr(9,1,"Q:");
 		 	Lcd1602_Write_Data(money/1000%10+0x30);
 		  Lcd1602_Write_Data(money/100%10+0x30);
 		  Lcd1602_Write_Data(money/10%10+0x30);
 			LcdShowStr(14,1,".");
 		  Lcd1602_Write_Data(money%10+0x30);
 		   money=money/10;
 	  }
 }
 void keypros()
 {
 	 	if(k2==0)
 	{
 		delay11(1000);  //消抖处理
 		if(k2==0)
 		{
 			sudu=At24c02Read(10);	  //读取EEPROM地址1内的数据		
 		  b2=At24c02Read(1);
 	    c2=At24c02Read(8);
      journey=(b2<<8) | c2;
 			money=At24c02Read(5);
 		}
 		while(!k2);
 	}
 	if(model == 0) LcdShowStr(13,0," ");
 	else if(model == 1) LcdShowStr(13, 0, "L");
 	else if(model == 2) LcdShowStr(13, 0, "M");
 	else LcdShowStr(13, 0, "H");
 }
 void Key_scan(){
 	if(k1==0)
 	{
 		delay11(1000);  //消抖处理
-		if(k1==0)
+		if(k1==0){
-		{
+			model++;
-			flas=1;
+			if(model >= 4) model = 0;
 		}
 		while(!k1);
 	}
-	if(k4==0)
+	
 	if(k2==0)
 	{
 		delay11(1000);  //消抖处理
-		if(k4==0)
+		if(k2==0){
-		{
+			set = 1;
 			if(pwm_left>=20)
 			{
 				pwm_left=1;
 			}
 		  else
      {				
 			pwm_left++;
 			}
 		}
-		while(!k4);
+		while(!k2);
 	}
-	
+
- }
+}
- 
+
- void time0() interrupt 1	 //定时器 0 
+void time0() interrupt 1	
- {
+{
-   TH0=0x3C;
+	static int time = 0;
-   TL0=0xb0;				 //50ms定时
+	TH0=0XFc;
-   ms++;					   //变量50ms加一	
+	TL0=0X18;
-   if(ms%5==0)   s0=~s0;
+	time++;	
-	 
+	pwm_out_right_moto();
-	 
+	if(time >= 500){
-   if(ms%10==0) 			 //500ms定时
+		EX1=0;
-    {
+		time = 0;		 
-			
+		r_s=count;			 						
-				if(sec!=0)  sec--;
+		count=0;
-				if(sec1!=0) sec1--;
+		EX1=1;				
-				ms=0;					 //清零变量
+		speed=speed*0.5+(r_s*6)*0.5;         
-				EX1=0;				 //关闭外部中断，保证变量在计算的时候不会增加
+		speed=(0.15*speed);
-				r_s=count;			 //因为是500ms检测一次转动数据，所以要想一秒转动的圈数是 speed=count*2   ,但是光栅是一圈20格，所以还要除以20；
+		mileage = mileage+(r_s*2.5/20);
 												 //综合一下，一秒转动的圈数就是  speed=count*2/20    ==》   speed=counr/10;
 					count=0;		         //清零变量
 				EX1=1;				 //打开外部中断
 				speed=speed*0.5+(r_s*6)*0.5;          //	这里r_s是一秒走的圈数，然后乘以60得到60秒走的圈数，单位变成了   r/min；	 总方式  speed=count/10*60;  ==>> speed=count*6;
 			  if(flas==0)
 				{
 					sudu=(0.15*speed);
 					At24c02Write(10,sudu);
 					journey=journey+(r_s*2.5/20);
 					journey1=journey;
 					c = journey & 0x00FF;
 					At24c02Write(8,c);
 					delay11(1000); 
 					b=journey1>>8;
 					At24c02Write(1,b);
 				}
 				else
 				{
 					journey=0;
 					money=7;				
 					At24c02Write(1,journey);
 					At24c02Write(8,journey);
 					At24c02Write(5,money);
 					flas=0;
 				}
 	}
 }
- 
+
-void int1()  interrupt 2  //外部中断 1
+void int1() interrupt 2 
- {
+{
-	 
+	count++;			
-   count++;				  //中断每触发一次，变量加一  
+}
 }
--- a/IRIN.h
+++ b/IRIN.h
@ -5,19 +5,13 @@
 #include "lcd.h"
 #include "pwm.h"
 sbit k1=P3^5;
 sbit k2=P3^4;
 sbit k3=P3^3;
 sbit k4=P3^2;	 //¶¨Òå°´¼ü¶Ë¿Ú
 sbit k1=P3^5;
 sbit k2=P3^2;
 void IRIN_Init(void);
 void display();
 void keypros();
 #endif
--- a/i2c.LST
+++ b/i2c.LST
@ -1,4 +1,4 @@
-C51 COMPILER V9.56.0.0   I2C                                                               04/06/2022 22:40:09 PAGE 1   
+C51 COMPILER V9.56.0.0   I2C                                                               04/08/2022 02:58:55 PAGE 1   
 C51 COMPILER V9.56.0.0, COMPILATION OF MODULE I2C
@ -62,7 +62,7 @@ line level    source
  53          /*******************************************************************************
  54          * 函数名         : I2cSendByte(unsigned char dat)
  55          * 函数功能     : 通过I2C发送一个字节。在SCL时钟信号高电平期间，保持发送信号SDA保持稳定
-C51 COMPILER V9.56.0.0   I2C                                                               04/06/2022 22:40:09 PAGE 2   
+C51 COMPILER V9.56.0.0   I2C                                                               04/08/2022 02:58:55 PAGE 2   
  56          * 输入           : num
  57          * 输出           : 0或1。发送成功返回1，发送失败返回0
@ -126,7 +126,7 @@ line level    source
 115   1      }
 116          
 117          
-C51 COMPILER V9.56.0.0   I2C                                                               04/06/2022 22:40:09 PAGE 3   
+C51 COMPILER V9.56.0.0   I2C                                                               04/08/2022 02:58:55 PAGE 3   
 118          /*******************************************************************************
 119          * 函数名         : void At24c02Write(unsigned char addr,unsigned char dat)
--- a/i2c.OBJ
+++ b/i2c.OBJ
--- a/i2c.__i
+++ b/i2c.__i
@ -1 +0,0 @@
 "i2c.c" OPTIMIZE (8,SPEED) BROWSE DEBUG OBJECTEXTEND TABS (2)
--- a/i2c.h
+++ b/i2c.h
@ -12,5 +12,6 @@ unsigned char I2cSendByte(unsigned char dat);
 unsigned char I2cReadByte();
 void At24c02Write(unsigned char addr,unsigned char dat);
 unsigned char At24c02Read(unsigned char addr);
 void Delay10us();
 #endif
--- a/lcd.LST
+++ b/lcd.LST
@ -1,4 +1,4 @@
-C51 COMPILER V9.56.0.0   LCD                                                               04/06/2022 22:23:01 PAGE 1   
+C51 COMPILER V9.56.0.0   LCD                                                               04/08/2022 02:58:55 PAGE 1   
 C51 COMPILER V9.56.0.0, COMPILATION OF MODULE LCD
@ -62,7 +62,7 @@ line level    source
  53   1        X &= 0xF; //限制X不能大于15，Y不能大于1
  54   1        if (Y) X |= 0x40; //当要显示第二行时地址码+0x40;
  55   1        X |= 0x80; //算出指令码
-C51 COMPILER V9.56.0.0   LCD                                                               04/06/2022 22:23:01 PAGE 2   
+C51 COMPILER V9.56.0.0   LCD                                                               04/08/2022 02:58:55 PAGE 2   
  56   1        Lcd1602_Write_Cmd(X); //发命令字
  57   1        Lcd1602_Write_Data(DData); //发数据
--- a/lcd.OBJ
+++ b/lcd.OBJ
--- a/main.LST
+++ b/main.LST
@ -1,4 +1,4 @@
-C51 COMPILER V9.56.0.0   MAIN                                                              04/06/2022 23:54:42 PAGE 1   
+C51 COMPILER V9.56.0.0   MAIN                                                              04/08/2022 03:21:37 PAGE 1   
 C51 COMPILER V9.56.0.0, COMPILATION OF MODULE MAIN
@ -13,135 +13,235 @@ line level    source
   4          #include "pwm.h"
   5          #include "i2c.h"
   6          #include "IRIN.h"
-   7          
+   7          #include <string.h>
-   8          unsigned char PuZh[]=" Pechin Science ";
+   8          #include <stdio.h>
-   9          extern uint journey;
+   9          # include <stdlib.h>
-  10          extern uint money;
+  10          
-  11          extern uchar sudu;
+  11          #define uint unsigned int
-  12          unsigned int b12;
+  12          #define uchar unsigned char  
-  13          unsigned int c12;
+  13          
-  14          
+  14          typedef unsigned char uint8;
-  15          
+  15          typedef unsigned int uint16;
-  16          unsigned int b123;
+  16          
-  17          unsigned int c123;
+  17          extern uint mileage;
-  18          extern unsigned char pwm_left;
+  18          extern uint speed;
-  19          unsigned char code ASCII[15] =   {'0','1','2','3','4','5','6','7','8','9','.','-','M'};
+  19          
-  20          
+  20          uint model = 0;
-  21          void delayms(unsigned int ms)
+  21          
-  22          {
+  22          extern unsigned char pwm_value;
-  23   1        unsigned char i=100,j;
+  23          
-  24   1        for(;ms;ms--)
+  24          
-  25   1        {
+  25          struct UserInfo{
-  26   2          while(--i)
+  26            int height;
-  27   2          {
+  27            int weight;
-  28   3            j=10;
+  28            int target_mileage;
-  29   3            while(--j);
+  29            int target_speed;
-  30   3          }
+  30          };
-  31   2        }
+  31          
-  32   1      }
+  32          uchar set = 0;
  33          
-  34          void Uart_Init()                                //使用定时器1作为波特率发生器（STC89C52、STC89C51、AT89C51
+  34          struct UserInfo usr;
-             -等均可）
+  35          
-  35          { 
+  36          /*****************相关变量**************/
-  36   1          TMOD = 0x20 | 0x01;
+  37          
-  37   1      
+  38          uchar Receive;   
-  38   1          SCON = 0x50;                                 //设置串行方式
+  39          uchar Recive_table[40];                  //用于接收wifi模块反馈到MCU上的数据
-  39   1      
+  40          
-  40   1          TH1 = 0xFD;                                         //波特率9600
+  41          bit accept = 0;
-  41   1      
+  42          
-  42   1          TL1 = TH1;
+  43          void delayms(unsigned int ms)
-  43   1      
+  44          {
-  44   1          PCON = 0x00;
+  45   1        unsigned char i=100,j;
-  45   1      
+  46   1        for(;ms;ms--)
-  46   1          EA = 1;                                                //总中断打开
+  47   1        {
-  47   1      
+  48   2          while(--i)
-  48   1          ES = 1;                                                //开串口中断 
+  49   2          {
-  49   1      
+  50   3            j=10;
-  50   1          TR1 = 1;                                        //启动定时器1
+  51   3            while(--j);
-  51   1      
+  52   3          }
-  52   1      }
+  53   2        }
-  53          
+  54   1      }
  54          void us_delay(uchar t)
 C51 COMPILER V9.56.0.0   MAIN                                                              04/06/2022 23:54:42 PAGE 2   
  55          
-  56          { 
+C51 COMPILER V9.56.0.0   MAIN                                                              04/08/2022 03:21:37 PAGE 2   
-  57   1      
+
-  58   1              while(t--);
+  56          void Uart_Init()                                
-  59   1      
+  57          { 
-  60   1      } 
+  58   1        TMOD = 0x20 | 0x01;
-  61          
+  59   1        SCON = 0x50;                                
-  62          void Send_Uart(uchar value)
+  60   1        TH1 = 0xFD;                                         
-  63          
+  61   1        TL1 = TH1;
-  64          { 
+  62   1        PCON = 0x00;
-  65   1      
+  63   1        EA = 1;                                                
-  66   1              ES=0;                                                  //关闭串口中断 
+  64   1        ES = 1;                                           
-  67   1      
+  65   1        TR1 = 1;                                        
-  68   1              TI=0;                                           //清发送完毕中断请求标志位  
+  66   1      }
-  69   1      
+  67          
-  70   1              SBUF=value;                                 //发送 
+  68          void us_delay(uchar t)
-  71   1      
+  69          { 
-  72   1              while(TI==0);                                 //等待发送完毕  
+  70   1          while(t--);
-  73   1      
+  71   1      } 
-  74   1              TI=0;                                           //清发送完毕中断请求标志位  
+  72          
-  75   1      
+  73          void Send_Uart(uchar value)
-  76   1              ES=1;                                                  //允许串口中断  
+  74          { 
-  77   1      
+  75   1        ES=0;                                                  
-  78   1      } 
+  76   1        TI=0;                                            
-  79          
+  77   1        SBUF=value;                               
-  80          void ESP8266_Set(uchar *puf)         // 数组指针*puf指向字符串数组                
+  78   1        while(TI==0);                                 
-  81          
+  79   1        TI=0;                                             
-  82          {   
+  80   1        ES=1;                                                 
-  83   1      
+  81   1      } 
-  84   1              while(*puf!='\0')                    //遇到空格跳出循环 
+  82          
-  85   1      
+  83          void Bluetooth_Set(uchar *puf)                    
-  86   1              {  
+  84          {   
-  87   2      
+  85   1        while(*puf!='\0')                    
-  88   2                      Send_Uart(*puf);                  //向WIFI模块发送控制指令。  
+  86   1        {  
-  89   2                      
+  87   2          Send_Uart(*puf);                  
-  90   2                      us_delay(5);  
+  88   2          us_delay(5);  
-  91   2      
+  89   2          puf++;   
-  92   2                      puf++;   
+  90   2        } 
-  93   2      
+  91   1      }
-  94   2              } 
+  92          
-  95   1      
+  93          
-  96   1      }
+  94          void saveUserInfo(){
-  97          
+  95   1        int target = 0;
-  98          void main(void)
+  96   1        target = usr.height >> 8;
-  99          {
+  97   1        At24c02Write(3, target);
- 100   1        int i = 0;
+  98   1        delayms(2);
- 101   1        InitLcd1602();
+  99   1        target = (usr.height) & 0x00ff;
- 102   1        IRIN_Init();
+ 100   1        At24c02Write(4, target);
- 103   1        Uart_Init(); 
+ 101   1        delayms(2);
- 104   1        pwm_left=10;
+ 102   1        target = (usr.weight) >> 8;
- 105   1        b12=At24c02Read(1);
+ 103   1        At24c02Write(5, target);
- 106   1        c12=At24c02Read(8);
+ 104   1        delayms(2);
- 107   1        money = 120;
+ 105   1        target = (usr.weight) & 0x00ff;
- 108   1        money=At24c02Read(5);
+ 106   1        At24c02Write(6, target);
- 109   1        journey = (b12<<8)|c12;
+ 107   1        delayms(2);
- 110   1        
+ 108   1      }
- 111   1        while(1)
+ 109          
- 112   1        {
+ 110          
- 113   2          run();
+ 111          void Bluetooth_Accept(){
- 114   2          ESP8266_Set("1111\r\n");
+ 112   1        int target1 = 0, target2 = 0, i = 0;
- 115   2          display();
+ 113   1        if(accept){
- 116   2          keypros();
+ 114   2          if(strstr(Recive_table, "inquire") != NULL){
-C51 COMPILER V9.56.0.0   MAIN                                                              04/06/2022 23:54:42 PAGE 3   
+ 115   3            memset(Recive_table, 0, sizeof(Recive_table));
 116   3            sprintf(Recive_table, "speed:%d km/h mileage:%d m\r\n",speed, mileage);
 117   3            Bluetooth_Set(Recive_table);
 C51 COMPILER V9.56.0.0   MAIN                                                              04/08/2022 03:21:37 PAGE 3   
 118   3          }else if(strstr(Recive_table, "set:") != NULL){
 119   3            target1 = strstr(Recive_table, "(") - Recive_table;
 120   3            target2 = strstr(Recive_table, ",") - Recive_table;
 121   3            usr.height = 0;
 122   3            for(i = target1 + 1; i < target2; i++){
 123   4              usr.height = usr.height * 10 + (*(Recive_table + i) - 0x30);
 124   4            }
 125   3            Bluetooth_Set(Recive_table);
 126   3            target1 = strstr(Recive_table, ",") - Recive_table;
 127   3            target2 = strstr(Recive_table, ")") - Recive_table;
 128   3            usr.weight = 0;
 129   3            for(i = target1 + 1; i < target2; i++){
 130   4              usr.weight = usr.weight * 10 + (*(Recive_table + i) - 0x30);
 131   4            }
 132   3            memset(Recive_table, 0, sizeof(Recive_table));
 133   3            sprintf(Recive_table, "SET OK\r\n",usr.height, usr.weight);
 134   3            Bluetooth_Set(Recive_table);
 135   3            
 136   3            // 计算
 137   3            usr.target_mileage = (usr.weight / usr.height) * (usr.weight / usr.height) / 22 * 3000;
 138   3            usr.target_speed = 10 - (usr.weight / usr.height) * (usr.weight / usr.height) / 22 ;
 139   3            saveUserInfo();
 140   3          }
 141   2          memset(Recive_table, 0, sizeof(Recive_table));
 142   2          accept = 0;
 143   2        }
 144   1      }
 145          
 146          void ReadData(){
 147   1        mileage = At24c02Read(1) * 255 + At24c02Read(2);
 148   1        set = At24c02Read(7);
 149   1        if(set){
 150   2          usr.height = 0;
 151   2          usr.weight = 0;
 152   2          
 153   2          At24c02Write(1, 0);
 154   2          delayms(2);
 155   2          At24c02Write(2, 0);
 156   2          delayms(2);
 157   2          
 158   2          At24c02Write(3, 0);
 159   2          delayms(2);
 160   2          At24c02Write(4, 0);
 161   2          delayms(2);
 162   2          At24c02Write(5, 0);
 163   2          delayms(2);
 164   2          At24c02Write(6, 0);
 165   2          
 166   2        }else{
 167   2          usr.height = At24c02Read(3) * 255 + At24c02Read(4);
 168   2          usr.weight = At24c02Read(5) * 255 + At24c02Read(6);
 169   2        }
 170   1      }
 171          
 172          
 173          
 174          
 175          
 176          void WriteData(){
 177   1        int target = mileage >> 8;
 178   1        At24c02Write(1, target);
 179   1        delayms(2);
 C51 COMPILER V9.56.0.0   MAIN                                                              04/08/2022 03:21:37 PAGE 4   
- 117   2          Delay10us();
+ 180   1        target = mileage & 0x00ff;
-*** WARNING C206 IN LINE 117 OF main.c: 'Delay10us': missing function-prototype
+ 181   1        At24c02Write(2, target);
- 118   2        } 
+ 182   1        delayms(2);
- 119   1      }
+ 183   1      }
 184          
 185          void main(void)
 186          {
 187   1        InitLcd1602();
 188   1        IRIN_Init();
 189   1        Uart_Init(); 
 190   1        ReadData();
 191   1        while(1)
 192   1        {
 193   2          run();
 194   2          display();
 195   2          Key_scan();
 *** WARNING C206 IN LINE 195 OF main.c: 'Key_scan': missing function-prototype
 196   2          Bluetooth_Accept();
 197   2          WriteData();
 198   2        } 
 199   1      }
 200          
 201          void Uart_Interrupt() interrupt 4        
 202          {   
 203   1        static uchar i=0;
 204   1        if( accept) return;
 205   1        if(RI==1) {  
 206   2          RI=0;  
 207   2          Receive=SBUF;                                                        //MCU接收wifi模块反馈回来的数据    
             -  
 208   2          Recive_table[i]=Receive;  
 209   2          if((Recive_table[i]=='\r')){                    
 210   3            i=0;
 211   3            accept = 1;
 212   3          }   
 213   2          else i++;                                                                                  //遇到换行 重
             -新装值 
 214   2        }  
 215   1        else TI=0;  
 216   1      }
 MODULE INFORMATION:   STATIC OVERLAYABLE
-   CODE SIZE        =    179    ----
+   CODE SIZE        =   1000    ----
-   CONSTANT SIZE    =     22    ----
+   CONSTANT SIZE    =     57    ----
   XDATA SIZE       =   ----    ----
   PDATA SIZE       =   ----    ----
-   DATA SIZE        =     25       2
+   DATA SIZE        =     53       6
   IDATA SIZE       =   ----    ----
-   BIT SIZE         =   ----    ----
+   BIT SIZE         =      1    ----
 END OF MODULE INFORMATION.
--- a/main.OBJ
+++ b/main.OBJ
--- a/main.c
+++ b/main.c
@ -4,19 +4,41 @@
 #include "pwm.h"
 #include "i2c.h"
 #include "IRIN.h"
 #include <string.h>
 #include <stdio.h>
 # include <stdlib.h>
-unsigned char PuZh[]=" Pechin Science ";
+#define uint unsigned int
-extern uint journey;
+#define uchar unsigned char  
 extern uint money;
 extern uchar sudu;
 unsigned int b12;
 unsigned int c12;
 typedef unsigned char uint8;
 typedef unsigned int uint16;
-unsigned int b123;
+extern uint mileage;
-unsigned int c123;
+extern uint speed;
-extern unsigned char pwm_left;
+
-unsigned char code ASCII[15] =   {'0','1','2','3','4','5','6','7','8','9','.','-','M'};
+uint model = 0;
 extern unsigned char pwm_value;
 struct UserInfo{
 	int height;
 	int weight;
 	int target_mileage;
 	int target_speed;
 };
 uchar set = 0;
 struct UserInfo usr;
 /*****************相关变量**************/
 uchar Receive;   
 uchar Recive_table[40];                  //用于接收wifi模块反馈到MCU上的数据
 bit accept = 0;
 void delayms(unsigned int ms)
 {
@ -31,89 +53,164 @@ void delayms(unsigned int ms)
 	}
 }
-void Uart_Init()                                //使用定时器1作为波特率发生器（STC89C52、STC89C51、AT89C51等均可）
+void Uart_Init()                                
 { 
-    TMOD = 0x20 | 0x01;
+	TMOD = 0x20 | 0x01;
-
+	SCON = 0x50;                                
-    SCON = 0x50;                                 //设置串行方式
+	TH1 = 0xFD;                                         
-
+	TL1 = TH1;
-    TH1 = 0xFD;                                         //波特率9600
+	PCON = 0x00;
-
+	EA = 1;                                                
-    TL1 = TH1;
+	ES = 1;                                           
-
+	TR1 = 1;                                        
    PCON = 0x00;
    EA = 1;                                                //总中断打开
    ES = 1;                                                //开串口中断 
    TR1 = 1;                                        //启动定时器1
 }
 void us_delay(uchar t)
 { 
-
+    while(t--);
        while(t--);
 } 
 void Send_Uart(uchar value)
 { 
 	ES=0;                                                  
 	TI=0;                                            
 	SBUF=value;                               
 	while(TI==0);                                 
 	TI=0;                                             
 	ES=1;                                                 
 } 
-        ES=0;                                                  //关闭串口中断 
+void Bluetooth_Set(uchar *puf)                    
-
+{   
-        TI=0;                                           //清发送完毕中断请求标志位  
+	while(*puf!='\0')                    
-
+	{  
-        SBUF=value;                                 //发送 
+		Send_Uart(*puf);                  
-
+		us_delay(5);  
-        while(TI==0);                                 //等待发送完毕  
+		puf++;   
-
+	} 
-        TI=0;                                           //清发送完毕中断请求标志位  
+}
        ES=1;                                                  //允许串口中断  
-} 
+void saveUserInfo(){
 	int target = 0;
 	target = usr.height >> 8;
 	At24c02Write(3, target);
 	delayms(2);
 	target = (usr.height) & 0x00ff;
 	At24c02Write(4, target);
 	delayms(2);
 	target = (usr.weight) >> 8;
 	At24c02Write(5, target);
 	delayms(2);
 	target = (usr.weight) & 0x00ff;
 	At24c02Write(6, target);
 	delayms(2);
 }
 void ESP8266_Set(uchar *puf)         // 数组指针*puf指向字符串数组                
-{   
+void Bluetooth_Accept(){
 	int target1 = 0, target2 = 0, i = 0;
 	if(accept){
 		if(strstr(Recive_table, "inquire") != NULL){
 			memset(Recive_table, 0, sizeof(Recive_table));
 			sprintf(Recive_table, "speed:%d km/h mileage:%d m\r\n",speed, mileage);
 			Bluetooth_Set(Recive_table);
 		}else if(strstr(Recive_table, "set:") != NULL){
 			target1 = strstr(Recive_table, "(") - Recive_table;
 			target2 = strstr(Recive_table, ",") - Recive_table;
 			usr.height = 0;
 			for(i = target1 + 1; i < target2; i++){
 				usr.height = usr.height * 10 + (*(Recive_table + i) - 0x30);
 			}
 			Bluetooth_Set(Recive_table);
 			target1 = strstr(Recive_table, ",") - Recive_table;
 			target2 = strstr(Recive_table, ")") - Recive_table;
 			usr.weight = 0;
 			for(i = target1 + 1; i < target2; i++){
 				usr.weight = usr.weight * 10 + (*(Recive_table + i) - 0x30);
 			}
 			memset(Recive_table, 0, sizeof(Recive_table));
 			sprintf(Recive_table, "SET OK\r\n",usr.height, usr.weight);
 			Bluetooth_Set(Recive_table);
 			// 计算
 			usr.target_mileage = (usr.weight / usr.height) * (usr.weight / usr.height) / 22 * 3000;
 			usr.target_speed = 10 - (usr.weight / usr.height) * (usr.weight / usr.height) / 22 ;
 			saveUserInfo();
 		}
 		memset(Recive_table, 0, sizeof(Recive_table));
 		accept = 0;
 	}
 }
-        while(*puf!='\0')                    //遇到空格跳出循环 
+void ReadData(){
 	mileage = At24c02Read(1) * 255 + At24c02Read(2);
 	set = At24c02Read(7);
 	if(set){
 		usr.height = 0;
 		usr.weight = 0;
 		At24c02Write(1, 0);
 		delayms(2);
 		At24c02Write(2, 0);
 		delayms(2);
 		At24c02Write(3, 0);
 		delayms(2);
 		At24c02Write(4, 0);
 		delayms(2);
 		At24c02Write(5, 0);
 		delayms(2);
 		At24c02Write(6, 0);
 	}else{
 		usr.height = At24c02Read(3) * 255 + At24c02Read(4);
 		usr.weight = At24c02Read(5) * 255 + At24c02Read(6);
 	}
 }
        {  
                Send_Uart(*puf);                  //向WIFI模块发送控制指令。  
                us_delay(5);  
                puf++;   
        } 
 void WriteData(){
 	int target = mileage >> 8;
 	At24c02Write(1, target);
 	delayms(2);
 	target = mileage & 0x00ff;
 	At24c02Write(2, target);
 	delayms(2);
 }
 void main(void)
 {
 	int i = 0;
 	InitLcd1602();
 	IRIN_Init();
 	Uart_Init(); 
-	pwm_left=10;
+	ReadData();
 	b12=At24c02Read(1);
  c12=At24c02Read(8);
 	money = 120;
  money=At24c02Read(5);
  journey = (b12<<8)|c12;
 	while(1)
 	{
 		run();
 		ESP8266_Set("1111\r\n");
 		display();
-		keypros();
+		Key_scan();
-		Delay10us();
+		Bluetooth_Accept();
 		WriteData();
 	}	
 }
 void Uart_Interrupt() interrupt 4        
 {   
 	static uchar i=0;
 	if( accept) return;
 	if(RI==1) {  
 		RI=0;  
 		Receive=SBUF;                                                        //MCU接收wifi模块反馈回来的数据      
 		Recive_table[i]=Receive;  
 		if((Recive_table[i]=='\r')){                    
 			i=0;
 			accept = 1;
 		}   
 		else i++;                                                                                  //遇到换行 重新装值 
 	}  
 	else TI=0;  
 }
--- a/BIN
+++ b/BIN
--- a/pro.M51
+++ b/pro.M51
--- a/pro.build_log.htm
+++ b/pro.build_log.htm
@ -23,11 +23,12 @@ Project File Date:  05/31/2019
 <h2>Output:</h2>
 Build target 'Target 1'
-compiling IRIN.c...
+compiling main.c...
 main.c(195): warning C206: 'Key_scan': missing function-prototype
 linking...
-Program Size: data=71.5 xdata=0 code=2992
+Program Size: data=111.3 xdata=0 code=5315
 creating hex file from "pro"...
-"pro" - 0 Error(s), 0 Warning(s).
+"pro" - 0 Error(s), 1 Warning(s).
 Build Time Elapsed:  00:00:01
 </pre>
 </body>
--- a/pro.hex
+++ b/pro.hex
@ -1,223 +1,378 @@
-:100A9E00313131310D0A0030313233343536373899
+:10119800696E71756972650073706565643A256476
-:060AAE00392E2D4D000061
+:1011A800206B6D2F68206D696C656167653A2564F1
-:1008A90011212050656368696E20536369656E6321
+:1011B800206D0D0A007365743A0028002C00290080
-:0308B900652000B7
+:0911C800534554204F4B0D0A0061
-:100A3D007C64EF4E60131CEC60087D0A1DED60F6C2
+:0C12090002230000014E00C10901220078
-:090A4D0080FAEF1F70EC1E80E935
+:04135E007F027E008C
-:010A5600227D
+:101362007C64EF4E60131CEC60087D0A1DED60F694
-:100A8800758921759850758DFD858D8BE4F587D214
+:0913720080FAEF1F70EC1E80E907
-:060A9800AFD2ACD28E22A9
+:01137B00224F
 :10140700758921759850758DFD858D8BE4F587D28B
 :06141700AFD2ACD28E2220
 :07000300AE071FEE70FA22A8
-:0E0B7200C2ACC2998F993099FDC299D2AC22C3
+:0E149800C2ACC2998F993099FDC299D2AC2294
-:100A700012037BFF6011120B727F051200037401D9
+:06137C007B007A007926D7
-:080A800029F9E43AFA80E922A9
+:10138200120525FF60111214987F051200037401E3
-:10085300E4F50FF510120ACA120ADE120A88750BA4
+:0813920029F9E43AFA80E9228E
-:100863000A7F011209867532008F337F08120986C9
+:1010DB00E54FFF3395E0FEAD077F031213EE1213BE
-:100873007534008F357542007543787F05120986FC
+:1010EB005E7E00AF50AD077F041213EE12135EE568
-:100883007542008F43E5334534F53AE535F53B12C0
+:1010FB0051FF3395E0FEAD077F051213EE12135E21
-:100893000B367BFF7A0A799E120A7012040912073B
+:10110B007E00AF52AD077F061213EE7F027E000208
-:0608A300EC120B8580E958
+:02111B0013625D
-:100AF20075A0FFC287D286D285AFA0C285EF20E75C
+:100AF900E4F557F558F559F55AF55BF55C20090306
-:010B0200F6FC
+:100B0900020D0D7560FF756111756298FB7A0079A8
-:010B030022CF
+:100B190026121059E94A4B60337E007F287D007BFD
-:100B1600AE07120AF2C287C2868EA0D285C285228D
+:100B2900007A00792612065E7560FF75611175629B
-:100B2600AE07120AF2D287C2868EA0D285C285226D
+:100B3900A0850A63850B648510658511667B007A3B
-:100B0400ED7004AC078004EF2440FCEC4480FF0249
+:100B49000079261206E612137C020CFC7560FF750B
-:020B14000B16BE
+:100B590061117562BD7B007A007926121059E94A44
-:100A0400AE07AC0353050153060FED6003430640E4
+:100B69004B7003020CFC7560FF7561117562C27BE5
-:0D0A1400430680AF06120B16AF04020B263E
+:100B7900007A007926121059AE02C3E99426F55875
-:100938008B118A128913120B04AB11AA12A9131274
+:100B8900EE9400F5577560FF7561117562C47B00BD
-:10094800037B60130513E5137002051214F91203F3
+:100B99007A007926121059AE02C3E99426F55AEE65
-:080958007BFF120B2680E22256
+:100BA9009400F559E4F54FF550E5582401F55CE456
-:100ACA007F38120B167F0C120B167F06120B167F3D
+:100BB9003557F55BC3E55C955AE5596480F8E55B03
-:040ADA0001020B16F4
+:100BC900648098502A7426255CF8E624D0FBE43426
-:1008BC00010800010D00010E00010C00010B00C12C
+:100BD900FFFAAE4FAF507C007D0A12057DEF2BF571
-:0708CC0083C1840209000052
+:100BE90050EE3AF54F055CE55C7002055B80C51275
-:1009A800E4FDFCC3ED9FEC9E5015E4FBFA0BBB0085
+:100BF900137C7560FF7561117562C47A00792612DC
-:0F09B800010ABA07F8BBD0F50DBD00010C80E4B1
+:100C09001059AE02C3E99426F558EE9400F55775CC
-:0109C700220D
+:100C190060FF7561117562C67B007A007926121032
-:0F0B3600750D03850B0CC286D287D284C285222F
+:100C290059AE02C3E99426F55AEE9400F559E4F554
-:0F0B4500750D03750C04D286C287C284D2852237
+:100C390051F552E5582401F55CE43557F55BC3E5F8
-:0B0B9B00E4F50D750C04D284C2852225
+:100C49005C955AE5596480F8E55B648098502A748C
-:0B0BA600E4F50C750D04C286D2872216
+:100C590026255CF8E624D0FBE434FFFAAE51AF5206
-:1009C800300418E508D3950D5004D2B58002C2B59D
+:100C69007C007D0A12057DEF2BF552EE3AF5510510
-:0E09D800E508C394144006E4F50822C2B522D7
+:100C79005CE55C7002055B80C57E007F287D007B9A
-:1009E600300318E50ED3950C5004D2B48002C2B47D
+:100C8900007A00792612065E7560FF75611175623A
-:0E09F600E50EC394144006E4F50E22C2B422AE
+:100C9900C8854F638550648551658552667B007AA6
-:03001B00020A21B5
+:100CA9000079261206E612137CAC4FAD50AE51AF57
-:100A2100C0E0C0D0758DFC758B18050AE50A70020F
+:100CB900521205E4AC06AD0712057D7C007D1612C3
-:0C0A31000509050E1209E6D0D0D0E03215
+:100CC90005E47C0B7DB812057D8E538F54AC4FAD76
-:050B8000120B85D2817B
+:100CD90050AE51AF521205E4AC06AD0712057D7C4A
-:080B85007F017E02DEFEDFFAB3
+:100CE900007D161205E4C3740A9FF556E49EF55576
-:010B8D002245
+:100CF9001210DB7E007F287D007B007A00792612A6
-:0F0B5400D280120B80C280120B85C281020B85EA
+:040D0900065EC209B7
-:0A0BB100C280120B80D280020B8577
+:010D0D0022C3
-:0208F700AD074B
+:100F17007F011212DCEF75F0FFA4FFAEF0C006C030
-:1008F900E4FBFAEDC4131313540124FF9280ED2590
+:100F2700077F021212DCEFFDD0E02DF511D0E0347F
-:10090900E0FD120B80C281120B850BBB08E5D2807A
+:100F370000F5107F071212DC8F4EE54E6041E4F595
-:10091900120B85D28130800F0AEAD394C840F6C2FF
+:100F47004FF550F551F552FD7F011213EE12135E66
-:0E09290081120B857F0022C281120B857F0197
+:100F5700E4FD7F021213EE12135EE4FD7F0312130A
-:01093700229D
+:100F6700EE12135EE4FD7F041213EE12135EE4FD2E
-:10096000E4FDFCD280120B85D281120B85EC25E0D0
+:100F77007F051213EE12135EE4FD7F060213EE7F68
-:10097000FCA280E4334204120B85C281120B850D68
+:100F8700031212DCEF75F0FFA4FFAEF0C006C00736
-:05098000BD08E5AF0415
+:100F97007F041212DCEFFDD0E02DF550D0E03400D5
-:01098500224F
+:100FA700F54F7F051212DCEF75F0FFA4FFAEF0C01E
-:100A5700AC05A907120B547FA01208F7AF011208C3
+:100FB70006C0077F061212DCEFFDD0E02DF552D0F8
-:090A6700F7AF041208F7020BB10D
+:060FC700E03400F55122A8
-:02098600AC07BC
+:10133F00E5107E00FD7F011213EE12135E7E00AFEB
-:10098800120B547FA01208F7AF041208F7120B5489
+:0F134F0011AD077F021213EE7F027E00021362C0
-:0F0998007FA11208F7120960AD07120BB1AF056E
+:10139A0012141D121431121407120F1712123812D6
-:0109A700222D
+:0D13AA000E1C12115E120AF912133F80EFA3
-:100AB40053706565643A004B4D2F68004C3A004D05
+:030023000211D1F6
-:060AC40000513A002E0073
+:0911D100C0E0C0D075D000C000E0
-:1008D300024200070249000002440000014D0002E9
+:1011DA00200925309820C29885992574262522F859
-:1008E3003C0000024B0000C101C100C102014600EF
+:1011EA00A62574262522F8E6B40D07752200D20931
-:0308F300015200AF
+:0811FA00800605228002C29963
-:040B63007FE87E03A6
+:07120200D000D0D0D0E03293
-:0B0B6700EF1FAC0670011E4C70F62260
+:1014450075A0FFC287D286D285AFA0C285EF20E7FF
-:100ADE00758921758C3C758AB0D2A9D28CD2AFD2D1
+:01145500F6A0
-:040AEE00AAD28A22DC
+:011456002273
-:100409003001030205F27F0A1209867549008F4AF5
+:10146900AE07121445C287C2868EA0D285C28522D4
-:10041900D3E5439407E5429400400A7F0512098613
+:10147900AE07121445D287C2868EA0D285C28522B4
-:100429007542008F43E4FDFF120B047BFF7A0A79C2
+:10145700ED7004AC078004EF2440FCEC4480FF02ED
-:10043900B4E4FDFF120938AE49AF4A7C007D64126D
+:02146700146906
-:1004490003A67C007D0A1203A6ED2430FF120B26B9
+:1013B700AE07AC0353050153060FED600343064028
-:10045900AE49AF4A7C007D0A1203A67C007D0A12D0
+:0D13C700430680AF06121469AF04021479CA
-:1004690003A6ED2430FF120B26AE49AF4A7C007D6E
+:101267008B578A588959121457AB57AA58A959123C
-:100479000A1203A6ED2430FF120B267BFF7A0A79B4
+:10127700052560130559E5597002055814F912053B
-:10048900BBE4FD7F0A1209387BFF7A0A79C07D0136
+:0812870025FF12147980E22218
-:10049900E4FF120938AE3AAF3B7C277D101203A660
+:10141D007F381214697F0C1214697F061214697FCC
-:1004A9007C007D0A1203A6ED2430FF120B26AE3A1A
+:04142D00010214693B
-:1004B900AF3B7C037DE81203A67C007D0A1203A6EC
+:0B121500011500011400011300C10AC4
-:1004C900ED2430FF120B26AE3AAF3B7C007D64125F
+:10131F00E4FDFCC3ED9FEC9E5015E4FBFA0BBB0004
-:1004D90003A67C007D0A1203A6ED2430FF120B2629
+:0F132F00010ABA07F8BBD0F50DBD00010C80E430
-:1004E900AE3AAF3B7C007D0A1203A67C007D0A125E
+:01133E00228C
-:1004F90003A6ED2430FF120B26AE3AAF3B7C007DFC
+:10123800E52445237004F513801DE5246401452346
-:100509000A1203A6ED2430FF120B267BFF7A0A7923
+:1012480070057513028010E5246402452370057546
-:10051900C37D017F07120938D3E53B94E8E53A9496
+:0F1258001305800375130A851314C290D29122D7
-:10052900034031E53B2418FDE53A34FCFCE41202B2
+:1012FE000515A20AB35017E51595145004D2B48003
-:10053900C17B6F7A127903783B120116E4FBFA79D1
+:10130E0002C2B4E515C394144006E4F51522C2B426
-:10054900E078401200251202FA8E428F43AD437FB4
+:01131E0022AC
-:1005590005120A57AE42AF437C007D0A1203948EFE
+:0514A6001214ABD2811D
-:10056900428F437BFF7A0A79C57D017F09120938D9
+:0814AB007F017E02DEFEDFFA84
-:10057900AE42AF437C037DE81203A67C007D0A12DC
+:0114B3002216
-:1005890003A6ED2430FF120B26AE42AF437C007D5B
+:0F148900D2801214A6C2801214ABC2810214AB1F
-:10059900641203A67C007D0A1203A6ED2430FF1223
+:0A14BF00C2801214A6D2800214AB02
-:1005A9000B26AE42AF437C007D0A1203A67C007D78
+:02111D00AD071C
-:1005B9000A1203A6ED2430FF120B267BFF7A0A7973
+:10111F00E4FBFAEDC4131313540124FF9280ED2561
-:1005C900C87D017F0E120938AE42AF437C007D0A17
+:10112F00E0FD1214A6C2811214AB0BBB08E5D280EE
-:1005D9001203A6ED2430FF120B26AE42AF437C0076
+:10113F001214ABD28130800F0AEAD394C840F6C2A2
-:0A05E9007D0A1203A68E428F432202
+:0E114F00811214AB7F0022C2811214AB7F010B
-:1007EC0020B43B120B6320B4327F0A120986754980
+:01115D00226F
-:1007FC00008F4A7F01120986753E008F3F7F0812D9
+:1012B600E4FDFCD2801214ABD2811214ABEC25E013
-:10080C0009867540008F41E53F4540F53AE541F5D5
+:1012C600FCA280E43342041214ABC2811214AB0DAB
-:10081C003B7F051209867542008F4330B4FD20B52D
+:0512D600BD08E5AF04B6
-:10082C000B120B6320B502D20230B5FD20B21712A9
+:0112DB0022F0
-:10083C000B6320B20EE50BC394144005750B0180BD
+:1013EE00AC05A9071214897FA012111DAF011211AD
-:07084C0002050B30B2FD2292
+:0913FE001DAF0412111D0214BF01
-:03000B000205F3F8
+:0212DC00AC075D
-:1005F300C0E0C0F0C083C082C0D075D000C000C0CE
+:1012DE001214897FA012111DAF0412111D12148950
-:1006030001C002C003C004C005C006C007758C3C0E
+:0F12EE007FA112111D1212B6AD071214BFAF056A
-:10061300758AB0054DE54D75F00584E5F07002B2BD
+:0112FD0022CE
-:1006230000E54D75F00A84E5F06003020745E546F1
+:1013D400004B4D2F6820006D20202020202020204D
-:1006330060021546E55260021552754D00C2AA8547
+:0A13E400200020004C004D004800DE
-:10064300444B85454C754400754500D2AAAE4BAF6B
+:1012200002100000020C0000011200020A0000027D
-:100653004C7C007D06120394AC06AD07E41202C184
+:071230000E0000020800009F
-:10066300E4FBFAF9783F120116C004C005C006C0C6
+:0B14B400EF1FAC0670011E4C70F6220A
-:1006730007AC3CAD3DE41202C1E4FBFAF9783F124A
+:10143100758921758CFC758A18D2A9D28CD2AFD24C
-:100683000116D003D002D001D0001200251202FAC5
+:04144100AAD28A227F
-:100693008E3C8F3D300203020722AC3CAD3DE41299
+:100E1C00E4FDFF1214577BFF7A1379D4E4FDFF1223
-:1006A30002C17B9A7A997919783E1201161202FADD
+:100E2C001267AE0AAF0B7C007D6412058F7C007DCF
-:1006B3008E498F4AAD4A7F0A120A57AC4BAD4CE4C0
+:100E3C000A12058FED2430FF121479AE0AAF0B7C29
-:1006C3001202C1E4FBFA79207840120116E4FBFA26
+:100E4C00007D0A12058F7C007D0A12058FED24307F
-:1006D30079A0784112021FC004C005C006C007AC50
+:100E5C00FF121479AE0AAF0B7C007D0A12058FEDE0
-:1006E3003AAD3BE41202C1D003D002D001D00012D4
+:100E6C002430FF1214797BFF7A1379D5E4FD7F03CC
-:1006F30000251202FA8E3A8F3B853A47853B4875AF
+:100E7C001212677BFF7A1379D4E4FD7F0812126794
-:100703005000853B51AD517F08120A57120B63E528
+:100E8C00AE10AF117C007D6412058F7C007D0A12C0
-:1007130047F54F754E00AD4F7F01120A5780237581
+:100E9C00058FED2430FF121479AE10AF117C007D5C
-:100723003A00753B00754200754307AD3B7F0112EC
+:100EAC000A12058F7C007D0A12058FED2430FF128B
-:100733000A57AD3B7F08120A57AD437F05120A578C
+:100EBC001479AE10AF117C007D0A12058FED243031
-:10074300C202D007D006D005D004D003D002D00116
+:100ECC00FF1214797BFF7A1379DBE4FD7F0B12128E
-:0D075300D000D0D0D082D083D0F0D0E032E2
+:100EDC0067E524452370087BFF7A1379E68025E5C6
-:03001300020B8E4F
+:100EEC00246401452370087BFF7A1379E88015E5AB
-:0D0B8E00C0E00545E54570020544D0E032A9
+:100EFC0024640245237BFF70067A1379EA80057A15
-:10001E00020366E86480F8E933E83360110460F0A7
+:0B0F0C001379ECE4FD7F0D1212672248
-:10002E00ED33EC337009E8FCE9FDEAFEEBFF220448
+:10115E0020B5237FE87E031214B420B5160524E5CE
-:10003E0060DED3EB9FEA9EE99DE8C2E78CF0C2F743
+:10116E002470020523C39404E52394004005E4F59E
-:10004E0095F0400CE8CCF8E9CDF9EACEFAEBCFFB0F
+:10117E0023F52430B5FD20B2107FE87E031214B49F
-:10005E0012033185D0F05804700320D5B3E8047034
+:0A118E0020B203754E0130B2FD22BD
-:10006E00075002B2D502037092D5EC0460F7E4CCCF
+:03000B00020D0ED5
-:10007E00C0E0C398F8603B94186008400DD0E0FBD8
+:100D0E00C0E0C0F0C083C082C0D075D000C000C0AB
-:10008E00020348E4FBFAC9FC8028E830E406E4C920
+:0D0D1E0001C002C003C004C005C006C0072C
-:10009E00FBE4CAFCE830E305E4C9CACBFCE854072C
+:100D2B00758CFC758A180509E50970020508121205
-:1000AE006010F8C3E913F9EA13FAEB13FBEC13FC37
+:100D3B00FEC3E50994F4E508648094815003020E28
-:1000BE00D8F130F52FC3E49CFCEF9BFFEE9AFEEDDA
+:100D4B0001C2AA750800750900850C0E850D0F757B
-:1000CE0099FDD0E0FBEF4E4D4C701222DB03020384
+:100D5B000C00750D00D2AAAE0EAF0F7C007D0612F3
-:1000DE006DEC2CFCEF33FFEE33FEED33FDED30E730
+:100D6B00057DAC06AD07E41202C9E4FBFAF9783F46
-:1000EE00EB020348EF2BFFEE3AFEED39FDD0E0FBBD
+:100D7B0012011EC004C005C006C007AC0AAD0BE4CF
-:1000FE0050130BBB0003020370ED13FDEE13FEEF66
+:100D8B001202C9E4FBFAF9783F12011ED003D0021C
-:08010E0013FFEC13FC0203488F
+:100D9B00D001D00012002D1203028E0A8F0BAC0A69
-:10011600EC4D6011E8497017ED33EC3304600DE4E3
+:100DAB00AD0BE41202C97B9A7A997919783E12013C
-:10012600FCFFFEFD22E933E8330470F80203661291
+:100DBB001E1203028E0A8F0BAC0EAD0FE41202C98A
-:10013600033158046009E4CC248150062850090292
+:100DCB00E4FBFA7920784012011EE4FBFA79A07853
-:10014600037028400302036DC0E0EB4A7044B98097
+:100DDB0041120227C004C005C006C007AC10AD11FC
-:1001560006D0E0FB02035CEF4E701CBD8008EBFF8F
+:100DEB00E41202C9D003D002D001D00012002D12A0
-:10016600EAFEE9FD80EBE98DF0A4FEE5F00201FF71
+:060DFB0003028E108F11AF
-:10017600E9CDF9EAFEEBFFEF89F0A4FCE5F0CE89C4
+:100E0100D007D006D005D004D003D002D001D00045
-:10018600F0A42EFFE435F0CD89F0A42DFEE435F081
+:0B0E1100D0D0D082D083D0F0D0E032EF
-:100196008067EF4E7005BD80D780C3EF8BF0A4ACAF
+:03001300020016D2
-:1001A600F0EE8BF0A42CFCE435F0F8EF8AF0A42CEA
+:0D001600C0E0050DE50D7002050CD0E032D4
-:1001B600E5F038FCE433CB8DF0A42CFCE5F03BF8FD
+:1000260002036EE86480F8E933E83360110460F097
-:1001C600EE8AF0A42CFCE5F038F8E433CF89F0A4ED
+:10003600ED33EC337009E8FCE9FDEAFEEBFF220440
-:1001D6002CFCE5F038CF3400CE89F0A42FFFE5F0F3
+:1000460060DED3EB9FEA9EE99DE8C2E78CF0C2F73B
-:1001E6003EFEE433C98DF0A42EFEE5F039CD8AF04B
+:1000560095F0400CE8CCF8E9CDF9EACEFAEBCFFB07
-:1001F600A42FFFE5F03EFEE43DFD33D0E0FB5007C3
+:1000660012033985D0F05804700320D5B3E8047024
-:100206000BBB000F020370EC2CFCEF33FFEE33FE4A
+:10007600075002B2D502037892D5EC0460F7E4CCBF
-:06021600ED33FD02034878
+:10008600C0E0C398F8603B94186008400DD0E0FBD0
-:10021C00020370EC5D046005E85904700302036688
+:10009600020350E4FBFAC9FC8028E830E406E4C910
-:10022C00120331580460F6EC4860F2EC7004FDFEE9
+:1000A600FBE4CAFCE830E305E4C9CACBFCE8540724
-:10023C00FF22C860DB2481C85009C39860025006B5
+:1000B6006010F8C3E913F9EA13FAEB13FBEC13FC2F
-:10024C0002036D9850CAF582E9294B4A7005AB82BE
+:1000C600D8F130F52FC3E49CFCEF9BFFEE9AFEEDD2
-:10025C0002035C75F0007C1A7880C3EF9BEE9AED7C
+:1000D60099FDD0E0FBEF4E4D4C701222DB0302037C
-:10026C0099400DC3EF9BFFEE9AFEED99FDE842F02D
+:1000E60075EC2CFCEF33FFEE33FEED33FDED30E720
-:10027C00DC23ACF0D0E0FFD0E0FED0E0FDAB822080
+:1000F600EB020350EF2BFFEE3AFEED39FDD0E0FBAD
-:10028C00E7101BEB60BAEC2CFCEF33FFEE33FEED0A
+:1001060050130BBB0003020378ED13FDEE13FEEF55
-:10029C0033FD020348E803F830E705C0F075F000C1
+:0801160013FFEC13FC0203507F
-:1002AC00EF2FFFEE33FEED33FD40B830E7C280AAEE
+:10011E00EC4D6011E8497017ED33EC3304600DE4DB
-:1002BC0075F020800E75F010800575F0087D007EBD
+:10012E00FCFFFEFD22E933E8330470F802036E1281
-:1002CC00007F003392D530D5031203FBEC33401082
+:10013E00033958046009E4CC248150062850090282
-:1002DC00EF33FFEE33FEED33FDEC33FCD5F0ED22C6
+:10014E000378284003020375C0E0EB4A7044B9807F
-:0E02EC00E5F0247EA2D513CC92E7CDCEFF2202
+:10015E0006D0E0FB020364EF4E701CBD8008EBFF7F
-:1002FA00EDD2E7CD33EC3392D524814006E4FFFEFC
+:10016E00EAFEE9FD80EBE98DF0A4FEE5F002020760
-:10030A00FDFC22FCE4CFCECDCC24E0501174FF805A
+:10017E00E9CDF9EAFEEBFFEF89F0A4FCE5F0CE89BC
-:10031A00EDC3CC13CCCD13CDCE13CECF13CF0470F7
+:10018E00F0A42EFFE435F0CD89F0A42DFEE435F079
-:07032A00F030D5DE0203FBF9
+:10019E008067EF4E7005BD80D780C3EF8BF0A4ACA7
-:10033100E9D2E7C933E833F892D5EDD2E7CD33EC12
+:1001AE00F0EE8BF0A42CFCE435F0F8EF8AF0A42CE2
-:0703410033FC5002B2D5228B
+:1001BE00E5F038FCE433CB8DF0A42CFCE5F03BF8F5
-:10034800EC30E7100FBF000C0EBE00080DBD000416
+:1001CE00EE8AF0A42CFCE5F038F8E433CF89F0A4E5
-:100358000BEB6014A2D5EB13FCED92E7FD2274FFC2
+:1001DE002CFCE5F038CF3400CE89F0A42FFFE5F0EB
-:10036800FCFDFEFF22E480F8A2D574FF13FC7D801B
+:1001EE003EFEE433C98DF0A42EFEE5F039CD8AF043
-:03037800E480EF2F
+:1001FE00A42FFFE5F03EFEE43DFD33D0E0FB5007BB
-:0300000002076094
+:10020E000BBB000F020378EC2CFCEF33FFEE33FE3A
-:0C076000787FE4F6D8FD7581520207A7EF
+:06021E00ED33FD02035068
-:10037B00BB010689828A83E0225002E722BBFE0280
+:10022400020378EC5D046005E85904700302036E70
-:09038B00E32289828A83E49322B3
+:10023400120339580460F6EC4860F2EC7004FDFED9
-:10039400EF8DF0A4A8F0CF8CF0A428CE8DF0A42E7D
+:10024400FF22C860DB2481C85009C39860025006AD
-:0203A400FE2237
+:100254000203759850CAF582E9294B4A7005AB82AE
-:1003A600BC000BBE0029EF8DF084FFADF022E4CC3B
+:1002640002036475F0007C1A7880C3EF9BEE9AED6C
-:1003B600F875F008EF2FFFEE33FEEC33FCEE9DEC04
+:1002740099400DC3EF9BFFEE9AFEED99FDE842F025
-:1003C600984005FCEE9DFE0FD5F0E9E4CEFD22ED4A
+:10028400DC23ACF0D0E0FFD0E0FED0E0FDAB822078
-:1003D600F8F5F0EE8420D21CFEADF075F008EF2F94
+:10029400E7101BEB60BAEC2CFCEF33FFEE33FEED02
-:1003E600FFED33FD4007985006D5F0F222C398FD85
+:1002A40033FD020350E803F830E705C0F075F000B1
-:0503F6000FD5F0EA2222
+:1002B400EF2FFFEE33FEED33FD40B830E7C280AAE6
-:0E03FB00C3E49FFFE49EFEE49DFDE49CFC2213
+:1002C40075F020800E75F010800575F0087D007EB5
-:10076C00020853E493A3F8E493A34003F68001F248
+:1002D400007F003392D530D50312061AEC33401058
-:10077C0008DFF48029E493A3F85407240CC8C3338E
+:1002E400EF33FFEE33FEED33FDEC33FCD5F0ED22BE
-:10078C00C4540F4420C8834004F456800146F6DF5D
+:0E02F400E5F0247EA2D513CC92E7CDCEFF22FA
-:10079C00E4800B01020408102040809008A9E47E3C
+:10030200EDD2E7CD33EC3392D524814006E4FFFEF3
-:1007AC00019360BCA3FF543F30E509541FFEE49352
+:10031200FDFC22FCE4CFCECDCC24E0501174FF8052
-:1007BC00A360010ECF54C025E060A840B8E493A319
+:10032200EDC3CC13CCCD13CDCE13CECF13CF0470EF
-:1007CC00FAE493A3F8E493A3C8C582C8CAC583CA44
+:07033200F030D5DE02061ACF
-:1007DC00F0A3C8C582C8CAC583CADFE9DEE780BEFC
+:10068A00E5742460F8E6057422785D300702786024
-:0108F6000001
+:10069A00E475F0011206280205252000EB7F2ED210
 :1006AA00008018EF540F2490D43440D4FF30040B48
 :1006BA00EF24BFB41A0050032461FFE575600215E8
 :1006CA00750578E5787002057730070D785DE47571
 :1006DA00F001120628EF02056B02128F7403D2078B
 :1006EA008003E4C207F5748B5D8A5E895FE4F57561
 :1006FA00F577F578E57560077F201206C580F575F0
 :10070A0076FFC201C200C202C203C205C206C20803
 :10071A00120693FF700D3007057F001206D6AF78D8
 :10072A00AE7722B4255FC2D5C204120693FF24D045
 :10073A00B40A00501A75F00A787530D50508B6FF64
 :10074A000106C6A426F620D5047002D20380D92455
 :10075A00CFB41A00EF5004C2E5D2040209C3D20191
 :10076A0080C6D20080C0D20280BCD2D580BAD2055F
 :10077A0080B47F201206C52002077401B5750040B7
 :10078A00F112068AFF1206C50206FED208D20680B8
 :10079A009512068AFB12068AFA12068AF94A4B70E1
 :1007AA000679BA7A0A7BFF20022EE575602A7E0056
 :1007BA008E8275830012053E60060EEE657670F035
 :1007CA00C2D5EBC0E0EAC0E0E9C0E0EE120A23D0ED
 :1007DA00E0F9D0E0FAD0E0FB120525FF60AAEBC0F1
 :1007EA00E0EAC0E0E9C0E01206C5D0E02401F9D091
 :1007FA00E03400FAD0E0FBE5760460DCD576D980F7
 :10080A0087D20280A2120A0660F7E5767001041206
 :10081A000383A976600DE576600914F576120AADB0
 :10082A00EF60F3EA30E702F404C3995077EAF4255B
 :10083A00760430E701E404F576800D120A0660C1F9
 :10084A00EA05762576120383EA7873F630E701E43F
 :10085A00257604D5760420050114120A23E4C0E0A3
 :10086A00120AAD7873E6601320E70714F61206AD94
 :10087A00802204F6D0E014C0E07F001206ADE576CF
 :10088A0060071206A41576800B3005031206A4D061
 :10089A00E00206FED0E00480C5120A0660A0E576F2
 :1008AA00041203837873EAF6E576200502600104F0
 :0508BA002404120A23D2
 :1008BF0074FF04C0E0120AAD1206ADE57620050202
 :1008CF0060031206A4D0E0B576E87F451206B7782C
 :1008DF0073E67F2B30E7047F2DF404C0E01206C5CA
 :1008EF00D0E075F00A84C0F01206AED0E01206AE6A
 :1008FF000206FE791080027908C206C2088008D26B
 :10090F00D5790A8004790AC2D5E576047002F576A6
 :10091F00E4FAFDFEFF12068AFC7B08200113120683
 :10092F008AFD7B1030000A12068AFE12068AFF7BB0
 :10093F0020EC3382D592D55013C3E43000069FFFCD
 :10094F00E49EFEE42001039DFDE49CFCE4CBF8C291
 :10095F0001EC700CCFCECDCCE824F8F870F38017F3
 :10096F00C3EF33FFEE33FEED33FDEC33FCEB33FB24
 :10097F00994002FB0FD8E9EB300105F8D0E0C448ED
 :10098F00B201C0E00AEC4D4E4F78207B0070C2EAF6
 :10099F00B5760040BCC0E0120A25D0F0D0E02001AF
 :1009AF0004C4C0E0C4B201C0F01206AED0F0D5F05E
 :1009BF00EB0206FE120638079B53090258076C4CD0
 :1009CF0007684209064F090E44090E49078143097A
 :1009DF00145508454608A345080F470ADA50077013
 :1009EF002D07742E07972B0778230795200AC32A04
 :1009FF000730480000078FE576B4FF0375760612BF
 :100A0F00068AFC12068AFD12068AFE12068AFF78F3
 :100A1F006C0203B2790AA2D5200314300509B9106C
 :100A2F00020404B9080104A2D520060250010420D3
 :100A3F0002689202B575005034C0E07F2030031970
 :100A4F007F30A20272067205500F120A7CC202C2D8
 :100A5F0006C205C2087F30800F300503E9C0E012DF
 :100A6F0006C5300503D0E0F9D0E0B575CC300517D9
 :100A7F007F30B9100C1206C57F583004077F78807D
 :100A8F0003B908031206C53002057F2D0206C57F84
 :100A9F00202008F87F2B2006F322920280CF7F00C0
 :100AAF00B407005005246CF8E6FF22286E756C6CB5
 :100ABF002900D20112068A3001F8C201787530D5AB
 :100ACF000108F60207302D5043495812068A2403B5
 :100ADF00B405004001E4900AD5931206B6743A1299
 :0A0AEF0006B6D20375750402090271
 :10033900E9D2E7C933E833F892D5EDD2E7CD33EC0A
 :0703490033FC5002B2D52283
 :10035000EC30E7100FBF000C0EBE00080DBD00040E
 :100360000BEB6014A2D5EB13FCED92E7FD2274FFBA
 :10037000FCFDFEFF22E480F8A2D574FF13FC7D8013
 :03038000E480EF27
 :10038300F920E72824F950037907E4F42402FB1841
 :10039300DBFDE624FB5014E9600DE4F618E604F6F1
 :0F03A300B40A08E4F6D9F57401F60A22C2D5228D
 :1003B200ED33EC3392D5FA602AB4FF33EDC2E77B1A
 :1003C200FF60067A0379D7E4227A0379E020D50424
 :1003D2007A0379DB224E614E002B494E46002D49AD
 :1003E2004E4600E47A08F608DAFC7B00740722E83D
 :1003F200C0E0ECC0E0EDC0E0EEC0E0EFC0E0EA75C6
 :10040200F010A4CAABF075F04DA42BFBE435F0FC60
 :10041200EA2410FAEB34C5FBEC34D9FCEDC2E7FF59
 :1004220075F056A4F42411C5F0F434C58FF0A42A53
 :10043200E5F03BE43CF620E7141204E5D0E0FFD0FF
 :10044200E0FED0E0FDD0E0FC1202278014F404129A
 :1004520004E5D0E0FFD0E0FED0E0FDD0E0FC1201E8
 :100462001ED0E0F8E6FAEDD2E7CD33EC332482FB7E
 :10047200E4C3CF33CFCE33CECD33CD33DBF37B07E3
 :1004820075F00A846004F6081B0AE5F0F6088FF09E
 :10049200740AA4FFACF08EF0740AA42CFEACF050E7
 :1004A200010C8DF0740AA42CFDE435F0F608DBDEB5
 :0304B200740722AA
 :1004B5003F8000004120000042C80000447A00004F
 :1004C500461C400047C35000497424004B189680D1
 :1004D5004CBEBC205A0E1BCA6753C21C749DC5AEC8
 :1004E500FB60065407601C2323120513EB54386088
 :1004F500091204FF12050E12011EECF8EDF9EEFAD1
 :10050500EFCB22EB12050E80F1543803241C900426
 :10051500B5FE93FC0EEE93FD0EEE930ECE93FF22E9
 :03000000020FCD1F
 :0C0FCD00787FE4F6D8FD758178021014DE
 :10052500BB010689828A83E0225002E722BBFE02D4
 :09053500E32289828A83E4932207
 :10053E00BB010CE58229F582E5833AF583E0225072
 :10054E0006E92582F8E622BBFE06E92582F8E222BC
 :0D055E00E58229F582E5833AF583E49322D6
 :10056B00BB010689828A83F0225002F722BBFE016F
 :02057B00F32269
 :10057D00EF8DF0A4A8F0CF8CF0A428CE8DF0A42E92
 :02058D00FE224C
 :10058F00BC000BBE0029EF8DF084FFADF022E4CC50
 :10059F00F875F008EF2FFFEE33FEEC33FCEE9DEC19
 :1005AF00984005FCEE9DFE0FD5F0E9E4CEFD22ED5F
 :1005BF00F8F5F0EE8420D21CFEADF075F008EF2FA9
 :1005CF00FFED33FD4007985006D5F0F222C398FD9A
 :0505DF000FD5F0EA2237
 :1005E400C2D5EC30E709B2D5E4C39DFDE49CFCEE32
 :1005F40030E715B2D5E4C39FFFE49EFE12058FC316
 :10060400E49DFDE49CFC800312058F30D507C3E410
 :060614009FFFE49EFE22A0
 :0E061A00C3E49FFFE49EFEE49DFDE49CFC22F1
 :10062800FAE6FB0808E6F925F0F618E6CA3AF622D3
 :10063800D083D082F8E4937012740193700DA3A351
 :1006480093F8740193F5828883E473740293686065
 :06065800EFA3A3A380DF65
 :10128F00EFB40A07740D12129A740A309811A899C4
 :10129F00B8130CC2983098FDA899C298B811F630BF
 :0712AF0099FDC299F5992297
 :101059008B5D8A5E895FAB60AA61A9621205256012
 :1010690063AB5DAA5EA95F120525605F8560638534
 :1010790061648562658B668A678968AB63AA64A9BE
 :1010890065120525FF6023AB66AA67A968120525C5
 :101099006F7017042565F565E43564F564740125F9
 :1010A90068F568E43567F56780D1AB63AA64A9651B
 :1010B9001205257002800D7401255FF55FE4355E28
 :1010C900F55E809DAB5DAA5EA95F227B007A0079FF
 :0210D9000022F3
 :10065E00EF4E6012EF60010EEDBB010B89828A83B3
 :10066E00F0A3DFFCDEFA2289F05007F709DFFCA9C0
 :0C067E00F022BBFEFCF309DFFCA9F02217
 :100FD90002139AE493A3F8E493A34003F68001F281
 :100FE90008DFF48029E493A3F85407240CC8C33319
 :100FF900C4540F4420C8834004F456800146F6DFE8
 :10100900E4800B0102040810204080901209E47E5C
 :10101900019360BCA3FF543F30E509541FFEE493DC
 :10102900A360010ECF54C025E060A840B8E493A3A3
 :10103900FAE493A3F8E493A3C8C582C8CAC583CACE
 :10104900F0A3C8C582C8CAC583CADFE9DEE780BE86
 :0112370000B6
 :00000001FF
--- a/pro.uvgui.QY
+++ b/pro.uvgui.QY
--- a/pro.uvopt
+++ b/pro.uvopt
@ -191,7 +191,7 @@
      <GroupNumber>1</GroupNumber>
      <FileNumber>1</FileNumber>
      <FileType>1</FileType>
-      <tvExp>1</tvExp>
+      <tvExp>0</tvExp>
      <tvExpOptDlg>0</tvExpOptDlg>
      <bDave2>0</bDave2>
      <PathWithFileName>.\main.c</PathWithFileName>
@ -203,7 +203,7 @@
      <GroupNumber>1</GroupNumber>
      <FileNumber>2</FileNumber>
      <FileType>1</FileType>
-      <tvExp>1</tvExp>
+      <tvExp>0</tvExp>
      <tvExpOptDlg>0</tvExpOptDlg>
      <bDave2>0</bDave2>
      <PathWithFileName>.\lcd.c</PathWithFileName>
@ -215,7 +215,7 @@
      <GroupNumber>1</GroupNumber>
      <FileNumber>3</FileNumber>
      <FileType>1</FileType>
-      <tvExp>1</tvExp>
+      <tvExp>0</tvExp>
      <tvExpOptDlg>0</tvExpOptDlg>
      <bDave2>0</bDave2>
      <PathWithFileName>.\pwm.c</PathWithFileName>
--- a/pwm.LST
+++ b/pwm.LST
@ -1,4 +1,4 @@
-C51 COMPILER V9.56.0.0   PWM                                                               04/06/2022 22:23:01 PAGE 1   
+C51 COMPILER V9.56.0.0   PWM                                                               04/08/2022 03:07:52 PAGE 1   
 C51 COMPILER V9.56.0.0, COMPILATION OF MODULE PWM
@ -9,135 +9,67 @@ line level    source
   1          #include "pwm.h"
   2          
-   3          unsigned char pwm_val_left  =0;//变量定义
+   3          unsigned char pwm_val_right =0;
-   4          unsigned char push_val_left =0;// 左电机占空比N/20
+   4          unsigned char push_val_right=0;
-   5          unsigned char pwm_val_right =0;
+   5          
-   6          unsigned char push_val_right=0;// 右电机占空比N/20
+   6          unsigned char pwm_value=0;
-   7          unsigned char pwm_left=0;
+   7          
-   8          
+   8          extern uint model;
-   9          bit Right_moto_stop=1;
+   9          
-  10          bit Left_moto_stop =1;
+  10          bit Right_moto_stop = 0;
  11          
-  12          unsigned  int  time1=0;
+  12          void delay(unsigned int k)
-  13             
+  13          {    
-  14             
+  14   1         unsigned int x,y;
-  15             
+  15   1         for(x=0;x<k;x++) 
-  16          /************************************************************************/  
+  16   1           for(y=0;y<2000;y++);
-  17          //延时函数  
+  17   1      }
-  18           void delay(unsigned int k)
+  18          
-  19          {    
+  19          void run(void)
-  20   1           unsigned int x,y;
+  20          {
-  21   1         for(x=0;x<k;x++) 
+  21   1        if(model == 0) pwm_value = 0;
-  22   1           for(y=0;y<2000;y++);
+  22   1        else if(model == 1) pwm_value = 2;
-  23   1      }
+  23   1        else if(model == 2) pwm_value = 5;
-  24          /************************************************************************/
+  24   1        else pwm_value = 10;
-  25          //前速前进
+  25   1        push_val_right=pwm_value;
-  26            void  run(void)
+  26   1        Right_moto_back;
-  27          {
+  27   1      }
-  28   1         push_val_left=3;  //速度调节变量 0-20。。。0最小，20最大
+  28          
-  29   1         push_val_right=pwm_left;
+  29          void pwm_out_right_moto(void)
-  30   1         Left_moto_go ;   //左电机往前走
+  30          { 
-  31   1         Right_moto_go ;  //右电机往前走
+  31   1        pwm_val_right++;
-  32   1      }
+  32   1        if(~Right_moto_stop){
-  33          
+  33   2          if(pwm_val_right <= push_val_right)
-  34           void  backrun(void)
+  34   2          {
-  35          {
+  35   3              Right_moto_pwm=1;  
-  36   1         push_val_left=3;  //速度调节变量 0-20。。。0最小，20最大
+  36   3          }
-  37   1         push_val_right=4;
+  37   2          else 
-  38   1         Left_moto_back;   //左电机往前走
+  38   2          {
-  39   1         Right_moto_back;  //右电机往前走
+  39   3            Right_moto_pwm=0;
-  40   1      }
+  40   3          }
-  41          
+  41   2          if(pwm_val_right>=20) pwm_val_right=0;
-  42          
+  42   2        }
-  43          //左转
+  43   1        else{
-  44               void  leftrun(void)
+  44   2            Right_moto_pwm=0;
-  45          {  
+  45   2        }
-  46   1           push_val_left=0;
+  46   1      }
-  47   1           push_val_right=4;
+  47                 
-  48   1           Right_moto_go ;  //右电机往前走
+  48          
-  49   1      }
+  49          
  50          
  51          
  52          //右转
  53          void  rightrun(void)
  54          { 
  55   1          push_val_right=0;
 C51 COMPILER V9.56.0.0   PWM                                                               04/06/2022 22:23:01 PAGE 2   
  56   1          push_val_left=4;
  57   1          Left_moto_go  ;   //左电机往前走
  58   1      }
  59          
  60          
  61          void pwm_out_left_moto(void)
  62          {  
  63   1         if(Left_moto_stop)
  64   1         {
  65   2          if(pwm_val_left<=push_val_left)
  66   2               {
  67   3               Left_moto_pwm=1; 
  68   3               }
  69   2           else 
  70   2               {
  71   3                 Left_moto_pwm=0;
  72   3               }
  73   2          if(pwm_val_left>=20)
  74   2               pwm_val_left=0;
  75   2          }
  76   1         else    
  77   1                {
  78   2                 Left_moto_pwm=0;
  79   2                }
  80   1      }
  81          /******************************************************************/
  82          /*                    右电机调速                                  */  
  83             void pwm_out_right_moto(void)
  84          { 
  85   1        if(Right_moto_stop)
  86   1         {
  87   2          if(pwm_val_right<=push_val_right)
  88   2              {
  89   3               Right_moto_pwm=1;  
  90   3             }
  91   2        else 
  92   2              {
  93   3             Right_moto_pwm=0;
  94   3              }
  95   2        if(pwm_val_right>=20)
  96   2               pwm_val_right=0;
  97   2         }
  98   1         else    
  99   1              {
 100   2                 Right_moto_pwm=0;
 101   2              }
 102   1      }
 103                 
 104          void timer1()interrupt 3
 105          {
 106   1         TH1=0XFc;    //1Ms定时
 107   1         TL1=0X18;
 108   1         time1++;
 109   1      //   pwm_val_left++;
 110   1         pwm_val_right++;
 111   1      //   pwm_out_left_moto();
 112   1         pwm_out_right_moto();
 113   1      } 
 114          
 115          
 116          
 117          
 C51 COMPILER V9.56.0.0   PWM                                                               04/06/2022 22:23:01 PAGE 3   
 MODULE INFORMATION:   STATIC OVERLAYABLE
-   CODE SIZE        =    172    ----
+   CODE SIZE        =    112    ----
 C51 COMPILER V9.56.0.0   PWM                                                               04/08/2022 03:07:52 PAGE 2   
   CONSTANT SIZE    =   ----    ----
   XDATA SIZE       =   ----    ----
   PDATA SIZE       =   ----    ----
-   DATA SIZE        =      7    ----
+   DATA SIZE        =      3    ----
   IDATA SIZE       =   ----    ----
-   BIT SIZE         =      2    ----
+   BIT SIZE         =      1    ----
 END OF MODULE INFORMATION.
--- a/pwm.OBJ
+++ b/pwm.OBJ
--- a/pwm.c
+++ b/pwm.c
@ -1,116 +1,50 @@
 #include "pwm.h"
 unsigned char pwm_val_left  =0;//变量定义
 unsigned char push_val_left =0;// 左电机占空比N/20
 unsigned char pwm_val_right =0;
-unsigned char push_val_right=0;// 右电机占空比N/20
+unsigned char push_val_right=0;
 unsigned char pwm_left=0;
-bit Right_moto_stop=1;
+unsigned char pwm_value=0;
 bit Left_moto_stop =1;
-unsigned  int  time1=0;
+extern uint model;
-   
+
-	 
+bit Right_moto_stop = 0;
-	 
+
-/************************************************************************/	
+void delay(unsigned int k)
 //延时函数	
 void delay(unsigned int k)
 {    
-     unsigned int x,y;
+   unsigned int x,y;
 	 for(x=0;x<k;x++) 
 	   for(y=0;y<2000;y++);
 }
 /************************************************************************/
 //前速前进
  void  run(void)
 {
   push_val_left=3;	 //速度调节变量 0-20。。。0最小，20最大
 	 push_val_right=pwm_left;
   Left_moto_go ;   //左电机往前走
 	 Right_moto_go ;  //右电机往前走
 }
- void  backrun(void)
+void run(void)
 {
-   push_val_left=3;	 //速度调节变量 0-20。。。0最小，20最大
+	if(model == 0) pwm_value = 0;
-	 push_val_right=4;
+	else if(model == 1) pwm_value = 2;
-	 Left_moto_back;   //左电机往前走
+	else if(model == 2) pwm_value = 5;
-	 Right_moto_back;  //右电机往前走
+	else pwm_value = 10;
-}
+	push_val_right=pwm_value;
-
+	Right_moto_back;
 //左转
     void  leftrun(void)
 {	 
     push_val_left=0;
 	   push_val_right=4;
 	   Right_moto_go ;  //右电机往前走
 }
-
+void pwm_out_right_moto(void)
 //右转
 void  rightrun(void)
 { 
-	  push_val_right=0;
+	pwm_val_right++;
-	  push_val_left=4;
+	if(~Right_moto_stop){
-    Left_moto_go  ;   //左电机往前走
+		if(pwm_val_right <= push_val_right)
-}
+		{
-
+				Right_moto_pwm=1;  
-
+		}
-void pwm_out_left_moto(void)
+		else 
-{  
+		{
-   if(Left_moto_stop)
+			Right_moto_pwm=0;
-   {
+		}
-    if(pwm_val_left<=push_val_left)
+		if(pwm_val_right>=20) pwm_val_right=0;
-	       {
+	}
-		     Left_moto_pwm=1; 
+	else{
-		     }
+			Right_moto_pwm=0;
-	   else 
+	}
 	       {
 	         Left_moto_pwm=0;
 		     }
 	  if(pwm_val_left>=20)
 	       pwm_val_left=0;
    }
   else    
          {
           Left_moto_pwm=0;
 		      }
 }
 /******************************************************************/
 /*                    右电机调速                                  */  
   void pwm_out_right_moto(void)
 { 
  if(Right_moto_stop)
   {
    if(pwm_val_right<=push_val_right)
 	      {
 	       Right_moto_pwm=1;  
 		   }
 	else 
 	      {
 		   Right_moto_pwm=0;
 		    }
 	if(pwm_val_right>=20)
 	       pwm_val_right=0;
   }
   else    
        {
           Right_moto_pwm=0;
 	      }
 }
 void timer1()interrupt 3
 {
   TH1=0XFc;	  //1Ms定时
 	 TL1=0X18;
 	 time1++;
 //	 pwm_val_left++;
 	 pwm_val_right++;
 //	 pwm_out_left_moto();
 	 pwm_out_right_moto();
 }	
--- a/pwm.h
+++ b/pwm.h
@ -15,26 +15,15 @@ void pwm_out_right_moto(void);
   //定义小车驱动模块输入IO口 
-sbit IN1=P0^4;
+sbit IN1=P1^0;
-sbit IN2=P0^5;
+sbit IN2=P1^1;
 sbit IN3=P0^6;
 sbit IN4=P0^7;
 sbit EN1=P3^4;
 sbit EN2=P3^5;
 sbit Left_moto_pwm=P3^5;	 //PWM信号端
 sbit Right_moto_pwm=P3^4;	 //PWM信号端
-#define Left_moto_go      {IN3=0,IN4=1;}  //左电机向前走
+
 #define Left_moto_back    {IN3=1,IN4=0;} 	//左边电机向后转
 #define Left_moto_Stop    {EN1=0;}         //左边电机停转                     
 #define Right_moto_go     {IN1=1,IN2=0;}	//右边电机向前走
 #define Right_moto_back   {IN1=0,IN2=1;}	//右边电机向后走
-#define Right_moto_Stop   {EN2=0;}      	//右边电机停转 
+#define Right_moto_Stop   {EN1=0;}      	//右边电机停转 
 #endif
		`@ -1 +0,0 @@`
			`"i2c.c" OPTIMIZE (8,SPEED) BROWSE DEBUG OBJECTEXTEND TABS (2)`